What does the battery light on the alternator mean?
This is the same connector that lets the on-board computer know if the alternator is charging or not, which is what the battery light actually means. You can use a volt meter to test what the battery is receiving by connecting it to the middle of the posts while the engine is running.
Is it normal for an alternator to not charge?
Still, it’s perfectly normal for others to see the alternator not charge at all intermittently. One test is not enough if you are diagnosing a charging system problem. All too often, the alternator is condemned as the source of the problem if only battery voltage is present with the engine running.
Why is the battery light on but charger is off?
The battery light is on but the voltmeter says 13.5 to 14.5 volts depending on the engine revs. When engine is off the volts drop to about 12. My mechanic says that the alternator must be charging – but why is the light on? Assuming that the voltmeter is correct and reads 13.5v to 14.5v, what could be the problem?
Can a battery voltage test be done on an alternator?
One test is not enough if you are diagnosing a charging system problem. All too often, the alternator is condemned as the source of the problem if only battery voltage is present with the engine running. If this is the case, it only means that the alternator is not charging, but does not reveal why.
Why is my Chevy Colorado Battery not charging?
The red battery light came on, indicating that my battery is not charging. I checked the battery itself, and it is good. The alternator checked out at autozone tested good. The maga fuse tested good. The tension belt is good. All of these components are good and in working condition, yet my battery is still not charging.
Why does the battery warning light come on after replacing the alternator?
A relatively common “side-effect” of replacing a battery and/or alternator in a car is to have the voltage (battery) warning light come on. This is especially true in late-model vehicles with their more sophisticated internal diagnostic systems.
What should the charge voltage be on an alternator?
Turn on the high beams for 10 seconds and then turn them off. Measure battery voltage across the battery posts with your DMM. You should get between 12.4 and 12.6V. This means your battery is fully charged. If you get a reading below 12.4V, charge the battery before continuing. 5b. Measure the Charging System’s No-Load Voltage
What kind of battery does Chevy Colorado have?
I have a 2007 colorado 5cy, 3.7 liter. The red battery light came on, indicating that my battery is not charging. I checked the battery itself, and it is good.
What happens when the dashboard battery light comes on?
Your car can often run normally even if the dashboard battery light comes on because the car is capable of running off the energy that is already stored in its battery. The car, therefore, carries on running perfectly until its battery runs flat. After that, none of the car’s components will work.
What should the resistance be for an alternator?
If all this checks out then I suspect you have a wiring issue. I would perform either a voltage drop or resistance measurement of each of the wires from the PCM to the alternator. Also, through the fusible link from the battery to the alternator. You should have less then a half ohm of resistance.
How many watts does an alternator put out?
The majority of vehicles have a voltage regulator and an alternator that ensures the battery stays charged while supplying electricity to your vehicle as the engine runs. Usually, an alternator puts out around 500-1000 watts whenever necessary.
How to check battery and alternator in Mercedes?
The dreaded battery warning light always leaves us not knowing if its the battery, the alternator or both. Watch as I show you how to check the state of these components via the secret diagnostics menu built into your Mercedes vehicle. Haven’t Subscribed? What are you waiting on? Do it today. Loading…
What does it mean when the Battery Light is on?
Check to make sure the wire is not broken. This is the same connector that lets the on-board computer know if the alternator is charging or not, which is what the battery light actually means. You can use a volt meter to test what the battery is receiving by connecting it to the middle of the posts while the engine is running.
How do I know if my battery or alternator is bad?
Signs of a bad alternator. If the above steps reveal that the battery is working, it’s time to take a closer look at the alternator. There are certain signs of a bad alternator to look for: While running the car, note the brightness of the interior lights. If the dashboard gradually dims, the alternator is likely at fault.
How do I know if it’s the battery or the alternator?
Check the Alternator. Test the alternator to make sure that it can start up the battery. If the battery is working properly and nothing is wrong with it, then it’s the alternator that will more likely cause a problem. Try to start the engine and listen carefully, if it produces a “whining” sound, it may be the alternator.
Why is your new alternator not charging your battery?
The most common reason for an alternator not charging a battery is because of a bad alternator or battery . You can easily test the voltage by connecting a voltmeter to your battery while the engine is off.
How do check alternator?
A simple test to check the working of the alternator is by running your car; and then unplugging the positive connection of the battery. If the car stops, then you most likely have a problem with the alternator. Another simple test is to check your interior lights. An alternator charges your battery when the car is running.
Is the control wire on my alternator broken?
As to the OP, there have been a couple members who have had problems with the control wire connector. This is the small connector that plugs into the back of the alternator. Check to make sure the wire is not broken.
This is the same connector that lets the on-board computer know if the alternator is charging or not, which is what the battery light actually means. You can use a volt meter to test what the battery is receiving by connecting it to the middle of the posts while the engine is running.
How can you tell if your car has a problem with the alternator?
If the car stops, then you most likely have a problem with the alternator. Another simple test is to check your interior lights. An alternator charges your battery when the car is running. If the interior and dashboard lights come on brightly but slowly start to fade, then it indicates a problem whit the alternator.
The dreaded battery warning light always leaves us not knowing if its the battery, the alternator or both. Watch as I show you how to check the state of these components via the secret diagnostics menu built into your Mercedes vehicle. Haven’t Subscribed? What are you waiting on? Do it today. Loading…
What should the voltage of an alternator be?
This time it should be at least 14.2 volts if the alternator is healthy and charging the battery. If voltage is good, turn on the headlights, interior lights, radio, heater and any other electrical load. The meter should still display above 13 volts.
Is the new battery and alternator testing good?
New battery and alternator testing good. Why? My battery light came on awhile ago, so I replaced the battery. It now will come on every and now and then. Just randomly I will be driving and it will come on and then a minute later go off. I have got alternator tested at Autozone and they said it was good. I have also tested it myself.
What happens when you buy a new alternator?
The mechanic went out of their way and bought a different alternator from a different vendor; installed it and the same problem happened. It would start after a jump then putter out moments later.
Why would a good alternator not charge a battery?
The alternator is powered by several different wiring mechanisms. If a wire is not attached properly, becomes detached or is inadvertently cut, the alternator will not have any power. If the alternator is not getting any power, it cannot turn the pulley and belt mechanism that charges the battery, and the battery will not charge.
What are the signs that an alternator is going bad?
One of the most common symptoms of a failing alternator is flickering, pulsating, or dimmed headlights. If your alternator is beginning to fail it won’t be able to power your headlights effectively.
Can a bad alternator damage a battery?
For one, a bad alternator can kill a battery, even if it was not the battery that was the issue to start with. When the alternator is going bad, the battery picks up the slack of providing electricity to the car’s electrical system.