What does VTEC stand for in Honda Accord?

What does VTEC stand for in Honda Accord?

The VTEC system is an integral part of your Accord’s engine It stands for Variable Valve Timing and Lift Electronic Control System. It uses the “VTEC Mechanism” to control valve timing. This is facilitated by sending oil into the VTEC system, which changes the engine timing.

Is the 2000 Honda Accord a good car?

The 2000 Honda Accord has a combined MPG of 30 which ranks it #2 of 18 other Midsize Cars. Is The 2000 Honda Accord A Good Car? Yes, it’s perfect, there’s enough space for my two children to sit comfortably plus it’s amazing on gas and has great mileage. Yes, the Honda Accord is a great vehicle.

How many miles does a Honda Accord last?

Honda Accord models can last up to 250,000 to 300,000 miles, provided you service them regularly. If you put 15,000 to 20,000 miles on your Honda Accord per year, you can use it for close to 20 years before it breaks down.

How much horsepower does a Honda Accord have?

* 148-hp @5700/148 lb.-ft. @4900 ULEV-rated engine available in California and parts of the Northeast. **Mileage figures shown for comparison only.

The VTEC system is an integral part of your Accord’s engine It stands for Variable Valve Timing and Lift Electronic Control System. It uses the “VTEC Mechanism” to control valve timing. This is facilitated by sending oil into the VTEC system, which changes the engine timing.

How much does a 2000 Honda Accord weigh?

2000 Honda Accord Sedan Change Vehicle. Vehicle Specifications. Curb Weight (lbs., MT/AT): 3064/3120. EPA Mileage Estimates*/Fuel Capacity (4 Speed Automatic EX)

Why is my Honda Accord p1259 not working?

This is facilitated by sending oil into the VTEC system, which changes the engine timing. A good rule of thumb is that if the P1259 code sets at 4000 RPM or below, it’s usually the VTEC pressure switch wiring issue or bad switch. If it is set at 4000 RPM or greater, it’ll usually be an oil related issue.

* 148-hp @5700/148 lb.-ft. @4900 ULEV-rated engine available in California and parts of the Northeast. **Mileage figures shown for comparison only.

What’s the code for Honda Accord system malfunction?

I have a 99 Honda accord I put it in machine it says the code is P1259Vtec System malfunction.. I have had oil changed, New spark plugs,New Fuses,Oil Filter,Oil treatment,Oil system cleaner,Oil pressure switch,Air Intake system Cleaner,replaced Sender Unit. Went to Get Smogged and It passed EVERYTHiNG Except check engine light…

2000 Honda Accord Sedan Change Vehicle. Vehicle Specifications. Curb Weight (lbs., MT/AT): 3064/3120. EPA Mileage Estimates*/Fuel Capacity (4 Speed Automatic EX)

This is facilitated by sending oil into the VTEC system, which changes the engine timing. A good rule of thumb is that if the P1259 code sets at 4000 RPM or below, it’s usually the VTEC pressure switch wiring issue or bad switch. If it is set at 4000 RPM or greater, it’ll usually be an oil related issue.

Are there any problems with the 1999 Honda Accord?

CarComplaints.com Notes: The 1999 Honda Accord suffers from widespread transmission failure, subframe rust, engine shuts off while driving, & peeling paint. We recommend avoiding this model year like the plague. Read more »

What does it mean when your Honda Accord says p1259?

P1259 specifically means that there is an issue with the VTEC circuit itself. Although, mechanical issues can cause the code to register as well. If you are unsure of the oil weight used in your Accord’s last oil change, this would be a great place to start.

How much does a 1999 Honda Accord weigh?

1999 Honda Accord Sedan Change Vehicle. Vehicle Specifications. Curb Weight (lbs., MT/AT): 2987/3053. EPA Mileage Estimates/Fuel Capacity (5 Speed Manual LX Sedan)

What kind of engine does a Honda Accord DX have?

F23A5: This engine was used in the 1998-2002 Honda Accord DX, the 1998-2002 Honda Accord LXi in New Zealand and the 2002 Honda Accord LX VP (value package) in North America. so im looking to order the f23a engine transmission combo from jdm Orlando.

P1259 specifically means that there is an issue with the VTEC circuit itself. Although, mechanical issues can cause the code to register as well. If you are unsure of the oil weight used in your Accord’s last oil change, this would be a great place to start.

https://www.youtube.com/watch?v=GLe5kMnSam4