What to do if your GMC radio says INOP?

What to do if your GMC radio says INOP?

If radio display reads “INOP” while the vehicle is on, too many incorrect radio codes have been entered. To remove “INOP” from your display and unlock your radio, you must leave the key in the On position for one hour. Once you’ve retrieved your radio unlock code, write it down for future use.

How do I get a GMC radio code?

If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around $10) fee. Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear.

Is the 1 factory radio AM CD player compatible?

1 Factory Radio AM FM CD Player Radio Compatible With 2003-05 Chevrolet Truck 10357894. — 2003 – 2004 – 2005 — Various Chevy & GMC Truck Radio AM FM CD Player Part Number: 10357894 Compatible Part Numbers: 15138488, 15104155, 15184932, 15198700, 15756188 Option Code: UB0 – Code Clear for Plug & Play functionality! – Skip the trip to the dealer!

How do you get the radio code on a Chevy?

Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140. Enter 106010 followed by the # key to direct you to the radio code retrieval system. Step 5: Enter the six digit code you retrieved in steps 2 and 3 followed by the * key. They must be in order. You will be given a four digit radio code. Write down the radio code.

How long does it take to return a GMC navigation radio?

Due to high sales volume, shipping times for certain products could be delayed. INTRODUCTION Our genuine pullout GMC® Infotainment 3 Premium IOU navigation radio modules feature a 90-day guarantee and a hassle-free return policy.

Where is the GPS antenna on a Chevy Silverado?

( Refer to PIC 1A) Route the GPS antenna just beneath the dash top ( under the windshield) and plug the blue connector into the newly installed HMI module. Done! 2014-2015 Silverado Sierra IO4 4″ to IO6 8″ GPS Navigation Upgrade – Easy Plug & Play Install!

What do I need to unlock my GMC radio?

To remove “INOP” from your display and unlock your radio, you must leave the key in the On position for one hour. Once you’ve retrieved your radio unlock code, write it down for future use. Your radio code will not change and having it handy will save from going from the radio code retrieval process again.

What happens to a GMC radio if battery dies?

Chevy and GMC vehicles both feature Theftlock radios which render the stereo inoperable to would-be thieves. The downside of the Theftlock system is that if your battery dies or becomes disconnected, you’ll need to enter the radio code to deactivate the Theftlock system.

How is the display on a car radio connected?

The display of the radio is connected with the radio with specific wires. Some car radios have wires between the display panel and main unit of the radio while some are soldered on the board. Every radio has a different type of connection between the display and the main unit of a car radio. Two ways can connect the display of the car radio.

How do you put a three digit code on a car radio?

Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code.

Is it possible to get a GM radio code?

Most GM dealerships will try to charge you a lot of money for a radio retrieval code, but it’s possible to get it yourself in a just a few short minutes, provided you know the dealer code associated with your vehicle’s radio.

When do you need a radio unlock code?

Operating the unit will require a “secret stereo unlock code” known only by the owner. A radio code is required if you have: Experienced a dead battery. Disconnected the factory radio harness. Disconnected the battery to thevehicle. Click on your vehicle below to retrieve code now!

Why does my car radio keep flashing code?

If your battery recently died, or had to be disconnected during a car repair, it might stop working and instead flash an obnoxious “CODE” message the next time you drive it. What does this mean and how can you fix it?