When did the Honda XR250Y come out?
In Australia a XR250Y was released with upside-down forks and electric start in 05-06. Single carburetor. Engine saw a smaller bore & longer stroke. 73mm bore × 59.5mm stroke. Revised suspension with 10.6 in (270 mm) of travel and a steeper steering angle. Updated dry-sump engine with lighter flywheel and counterweight now produces 19 hp.
What kind of suspension does a Honda XR250R have?
For the pre-1996 models, the suspension travel was 280 mm (11 in) front and rear. The XR250R is the enduro (competition) model; however, the L version is electric start, (except for the USA market XR250L, which never had electric start and which was discontinued after the 1996 model year), with pillion pegs, softer suspension and lower seat height.
What causes the exhaust to pop on a motorcycle?
So many things it could be, a lot depends on what model motorcycle. Too lean, as mentioned, is generally the cause. A vacuum leak is not uncommon. Plugged slow jets not uncommon (and that can cause other major problems. If the bike never did it, sat a long time and started popping, that’s more of a possibility).
What was the top speed of a Honda XR250R?
The 1996–2004 versions of the XR250R had 10.6 inches of suspension travel front and rear and 41mm front cartridge forks. The tire size was 80/100-21 front and 100/100-18 rear. It had 13–48 tooth gearing and a stock top speed of around 66 mph at 8000 rpm.
Is the Honda XR250 a play Bike?
Honda apparently realizes the XR250’s horsepower deficiency, for the factory makes a hop-up kit for this bike which is more elaborate than similar- kits for the XR185 and XR500. In perspective, the stock XR250 functions best as a playbike that is serious enough to avoid the foibles of less-commited designs.
What kind of engine does a Honda XR250R have?
From Wikipedia, the free encyclopedia The Honda XR250R and XR250L are trail and dual-sport motorcycles made by Honda from 1979 through 2004, as part of the Honda XR series. They have four-stroke, SOHC four-valve 249 cc (15.2 cu in) single-cylinder engines. In 1981, the XR250 was updated with a single rear shock.
So many things it could be, a lot depends on what model motorcycle. Too lean, as mentioned, is generally the cause. A vacuum leak is not uncommon. Plugged slow jets not uncommon (and that can cause other major problems. If the bike never did it, sat a long time and started popping, that’s more of a possibility).
How tall is a 1994 Honda XR250R?
A 1994 Honda XR250R Dimensions L: (86–91) 2,100 mm (82.7 in) (91–95) 2, Seat height (86–95) 920 mm (36.4 in) (96–04) 910 mm Weight (86–91) 108.6 kg (239.4 lb) (claimed) (9 Fuel capacity (86–95) 9.0 l; 1.98 imp gal (2.38 US gal