When to know if your Hino truck has a problem?
If you start to notice problems with acceleration and power, rough idling sensations, or a check engine light, these might be warning signs that your EGR valve might be faulty. The most telling of all is a rough time accelerating and getting up to your desired speed, as the valve is directly related to your engine’s cylinders firing.
How big is the Hino 258 diesel truck?
Hino 258 Truck, 2018, 268 000kms, 230HP, 6 cylinders 7,7L engine, Allison 6 gears automatic transmission, GAWR rear axle: 17,500lbs, platform width: 95 inches, cabin with bed. 2017 Hino 258, Diesel/Auto, Air Brake, Alum Wheels, Exh Brake, 186K miles. w 21′ Jerr-Dan, Rem Rail, 2- Tool Boxes, LED Light Bar, LED Work Lights, Wheel Lift & more.
Where is the Hino truck in North York?
North York, ON M9M 2L4 (click above for a map/directions) Hino Truck Troubleshooting By: Somerville Hino | 24 Dec 2018 With the best quality in the business, and an impressive warranty programfor all new Hinos sold, it’s hard to believe that you’ll ever experience any mechanical troubles.
Where can I rent a Hino truck in Somerville?
Somerville National Leasing Zeemac Vancouver Toll Free 1 (855) 919-2882 Local (416) 860-1600 75 Arrow Road, North York, ON Toll Free 1 (855) 919-2882 Local (416) 860-1600 Visit us at: 75 Arrow Road North York, ON M9M 2L4
What does low efficiency mean on a Hino truck?
Low efficiency means a lack of protection and higher component wear. The Hino Trucks Genuine Oil filter has nearly a 100% efficiency rating at 30 microns, while maintaining the lowest pressure differential on the market (to allow proper oil flow to the engine). Lower efficiency or higher pressure differential will lead to engine damage.
What kind of oil filter does a Hino truck use?
The Hino Trucks Genuine Oil filter has nearly a 100% efficiency rating at 30 microns, while maintaining the lowest pressure differential on the market (to allow proper oil flow to the engine). Lower efficiency or higher pressure differential will lead to engine damage.
Can a Hino engine be used without genuine parts?
Hino Genuine Parts are engineered for Hino trucks and are matched to the requirements and components of the engine. The bottom line? If you’re not using PUREHINO Genuine Parts, you’re not maximizing your vehicle’s potential. CHANGE INTERVALS UP TO 500,000 MILES. PROTECTION YOU CAN RELY ON.
How does the Hino quick reference guide work?
The Quick Reference Guide is designed to help you quickly look up parts for commonly ordered parts. The format has been changed from previous years. The main sections are in alphabetical order but the Sub-sections are not. The PART NAMEis listed in the first column.
What kind of truck is Hino 268 Reefer?
Off lease, dealer maintained non-CDL 2016 Hino 268A reefer truck. 18′ Morgan insulated body with Thermo King T680. Enter search information and click the Search button below. Use the TAB key to move between fields.
What kind of warranty does Hino 268 have?
2017 Hino 268A with an 18′ reefer body. EXTENDED WARRANTY IS GOOD UNITL 9-20-2021 OR 250,000 MILES. HINO WIH ALLISON AUTO. NICE 25FT FLATBED READY TO GO TO WORK.
Where can I find a Hino service manual?
For General Information or Technical Assistance regarding your Hino Truck, please contact your local Certified Hino Dealer. If you need an Owner’s / Driver’s Manual or a Service Repair Manual, please visit the online Publications page . For all other General concerns, email us at: [email protected]
Where can I download Hino 2016 COE chassis?
Hino Trucks dealers and body builders now have direct access to download 3D CAD models (.stp files) of all 2016MY and up conventional and COE chassis to be used for body design via a dedicated website www.hinocaddesign.com. The site requires registration and approval from Hino Trucks prior to accessing any information.
What are the five groups of Hino parts?
HINO uses five major groups. Engine – Electrical – Drive – Cab Rear Body and Chassis/Tool The sixth column is the FIGURE #that the part can be found in the Hino Electronic Parts Catalog and is helpful if you need other parts in addition to what’s listed in the Quick Reference Guide. See the example shown above from the EPC.
What kind of truck is Hino 700 series?
for drivers and business operators. The 700 series are Hino’s top-of-the-line trucks for drivers and business operators. Designed to deliver high output and excellent fuel efficiency. Achieves powerful driving via enhanced torque distinguished by a high degree of efficiency.
Where to buy a Hino truck in New York?
Visit us at: 75 Arrow Road North York, ON M9M 2L4 (click above for a map/directions) Toggle navigation 1 (855) 919-2882 Inventory Pre-Owned Hino Trucks All Pre-Owned Inventory Buy Back Program 2022 New Hino Trucks Hino Specs 2020 Hino Model Specs 2021 Hino Model Specs Hino Truck Options & Upfitting Hino Trucks Warranty Hino Truck Finder
Why do you need headlamps on a Hino truck?
Enhanced visibility at night. The headlamps brightly illuminate the area in front of the vehicle, facilitating nighttime detection of pedestrians along the roadside, as well as obstacles on the road. Meters with enhanced visibility contribute to safe driving.
Is there a problem with the Hino throttle?
When the Engine Idles And the Exhaust Brake Light is on, It will take off from a stop no problem. So, in a way we can “drive” around this problem but it’s Really annoying. We have replaced brake switch on the pedal. Swapped the Gas pedal And throttle Body from another truck, and verified the Throttle Plate Holes are present.
What’s the problem with the Hino flat bed?
Its a 2010 Hino 258 Flat bed. From a stop It Bogs real bad when you first press the gas pedal. It wont go over 5mph if you hold the pedal down. If you release the gas pedal and press it again, it will take off eventually. If you stab the brake pedal once while its Bogging it will take off as well.
What kind of technician is Hino 4WD?
Experience: ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications Verified My name is ***** ***** I will assist you with your question today.
What kind of telematics does a Hino truck use?
HINO INSIGHT TELEMATICS INCL. HINO INSIGHT: BUSINESS INTELLIGENCE. For MY2017 every Hino truck is equipped with, and supported by, the Hino Insight platform.
What kind of engine does a Hino 185 have?
READY TO WORK. Automatic; Spring Suspension; 4.88 Ratio; 19.5 Tires; 187 in Wheelbase; Single Axle; J05D-TF Hino Engine 175 hp; 16 ft Length x 96 in Width; Roll up Door; Standard Cab; Diesel Fuel Type; 6,250 lb Front Axle Weight; 13,000 lb Rear Axle Weight; 17,600 lb Gross Vehicle Weight; Drive Side: Left Hand
Is it normal to have a rough idle?
This is definitely not a normal situation. If you are experiencing a rough idle or your RPM is running high, then there are a variety of reasons for why this could be happening. It is not always easy to diagnose the cause because there are so many factors involved here. Below are the top 5 causes that a mechanic would look for.
What’s the difference between Hino and DPF engines?
The oil coolers leak. Three ‘D’ rings between cooler housing and block. Use right stuff Rtv, its tougher than the Hino stuff, and much less expensive. All 08-10 trucks with a Dpf : the intake throttle valve on all six cylinder engines have to be modified.
Are there oil coolers that leak on Hino trucks?
The oil coolers leak. Three ‘D’ rings between cooler housing and block. Use right stuff Rtv, its tougher than the Hino stuff, and much less expensive. All 08-10 trucks with a Dpf : the intake throttle valve on all six cylinder engines have to be modified. If the black intake hose between the air to air is removed, look inside the intake.
How to fix a faulty EGR valve Somerville Hino?
Somerville Hino Scarborough Somerville National Leasing Zeemac Vancouver Toll Free 1 (855) 919-2882 Local (416) 860-1600 75 Arrow Road, North York, ON Toll Free 1 (855) 919-2882 Local (416) 860-1600 Visit us at: 75 Arrow Road North York, ON M9M 2L4 (click above for a map/directions) How to Fix a Faulty EGR Valve
How to reset the Hino DPR maintenance message?
3.Press and hold the “Mode” and “Set Reset” buttons simultaneously for approximately 40 seconds to reset the “DPR Maintenance” Message. Procedure Complete.
What’s the best way to reset a check engine light?
In such a case, it is highly recommended to check the codes with a scanner instead. Switching the ignition on and off is also one method of hard reset without disconnecting batteries. Put the keys in your ignition and turn your ignition on and off consecutively after a second in each step.
Where to find the Hino production series Code?
HINO Production Series Code In order to insure you are ordering the correct part number for the vehicle you are working on it is criti- cal that you use the Production Series Code. This is located just below the VIN number on the VIN plate. The plate is attached to the passenger side doorjamb on all conventional trucks.
How many times does a Hino fault code flash?
6. For example, the lamp flashes 1 time, then a pause of 1.5 seconds, then flashes 3 times. This means code 13. 7. If two or more fault codes are stored in the memory of the electronic unit, the codes will be separated by a pause of 2.5 seconds.
How long does it take for a Hino test lamp to flash?
If there are no faults, the test lamp should flash at an interval of 0.26 seconds. – After all the codes are displayed, there is a pause of 4.5 seconds, and then they all repeat, while the “TE1” and “E1” pins of the diagnostic connector are short-circuited.
What kind of motor oil does a Hino truck use?
HINO GENUINE MOTOR OIL MEETS THESE SPECIFICATIONS: 1 • Caterpillar ECF-3. 2 • Cummins CES 20081. 3 • Detroit Diesel Power Guard 93K218. 4 • Deutz. 5 • Navistar International. More items
What is the pending fault code for Hino 268?
Air Tank Pressure is at 105, braking system is ok. – This code is the PENDING FAULT CODE (NO MIL). – This code is set when BCU detects low air pressure from the air tank. – BCU presume failure when 3 times low pressure events detected in a row. – If no P2431/P2636, this DTC can be ignored.
What does p0410 mean on a Hino truck?
P0410 doesn’t mean anything. It means that the air pressure in the tanks was low and it had to fill them up first before it could fire the burner to heat up the SCR. Go into the engine diagnostic menu, go to data monitor then activation test.