When to replace the fuel filter on a GMC?
1990-2008 CHEVY GMC GM FUEL FILTER REPLACEMENT | Save fuel lines and brackets like a professional! – YouTube If playback doesn’t begin shortly, try restarting your device.
How do you remove the fuel filter from a car?
Removing the Old Fuel Filter Disconnect the battery. Locate the fuel filter. Jack up the car if necessary. Place a bowl or bucket beneath the fuel filter. Remove the clips holding the fuel filter in place. Remove the fuel lines from the filter. Slide the fuel filter out of its bracket.
What to do if your fuel filter does not match?
If the fuel filters do not match, you will need to return the new one for the correct replacement filter. Do not attempt to use a fuel filter for a different application in your vehicle, as it may not be capable of allowing the appropriate volume of fuel to pass through it. Slide the new fuel filter into the bracket.
How is the fuel line attached to the fuel filter?
Fasten the fuel filter to the fuel line. Slide the fuel lines onto the front and back of the filter the same way they were attached to the old one. With the fuel line in place on the filter, slide the plastic clips through the holes on the fuel line nozzle to secure the line in place on the fuel filter.
Where is the fuel filter located on a GMC Yukon?
The 2003 GMC Yukon uses an in-line fuel filter for removing any debris that is in the fuel lines. The fuel pump is located in the fuel tank and suctions the fuel to send it through the fuel line and eventually to the injectors.
1990-2008 CHEVY GMC GM FUEL FILTER REPLACEMENT | Save fuel lines and brackets like a professional! – YouTube If playback doesn’t begin shortly, try restarting your device.
How do you unbolt a fuel filter?
Unscrew the outlet line of the fuel filter by turning the fuel line nut with a crescent wrench. Hold the nut on the filter with a crescent wrench. Pull the line away from the filter. Unscrew the inlet line in the same fashion. Have a drain pan standing by, as some fuel may still be in the lines. Unbolt the filter bracket with a socket wrench.
How do you remove a filter from a water heater?
Hold the nut on the filter with a crescent wrench. Pull the line away from the filter. Unscrew the inlet line in the same fashion. Have a drain pan standing by, as some fuel may still be in the lines. Unbolt the filter bracket with a socket wrench. Pull the filter away from the mounting bracket. Place the new filter in the mounting bracket.
Where is the fuel filter on a Chevy Silverado?
Removing a fuel filter on a 2000 chevy silverado. The Fuel filter is located on the drivers side on the inside of the frame just below the front door. This particular filter had some serious rust on the nuts of the fuel line.
How to remove rust on the fuel line?
This particular filter had some serious rust on the nuts of the fuel line. I first tried to remove the nuts using an open ended wrench and just started bending the fuel line, and rounding off the nut. I later tried it again with a flare nut wrench. this and plenty of penetrating oil gave me the ability to get the filter off. Loading…
How do you remove fuel lines from a fuel filter?
Remove the fuel lines from the filter. With the clips removed, slide the fuel lines away from the filter to pop them off of the nozzles on either end. Make sure to tip the fuel lines toward the bowl or bucket in place as you remove them to catch any spilled gasoline.
How to replace a fuel filter on a GMC Sierra?
To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: 56-om5LqBThfEqTf) An error occurred while retrieving sharing information. Please try again later.
If the fuel filters do not match, you will need to return the new one for the correct replacement filter. Do not attempt to use a fuel filter for a different application in your vehicle, as it may not be capable of allowing the appropriate volume of fuel to pass through it. Slide the new fuel filter into the bracket.
Where is the fuel filter on a Quadra Jet?
This car has a quadra jet carb from the factory and the fuel filter can be found by locating the fuel line going into the carb. Remove the fuel line, and there is a larger hex nut on the carb the line went in. Simply remove the nut and the filter is right inside the carb. Thanks!