Where is the speed sensor on my GMC Sierra?
Repair guides and support for C/K pickup trucks sold by General Motors under the GMC brand, including the GMC Sierra. Where is the speed sensor? My 1992 3/4 ton truck 4 wheel drive is throwing a code, 24 speed sensor failure, where do I find this sensor?
Where is the VSS sensor on a GM Truck?
To change the ratio on an 89 a reduction box was used on the speedometer cable at the trans or transfer case. I believe 1992 was the first year GM used a DRAC in the trucks. The 89 still used a speedo cable and the vss sensor was located in the speedo head.
Is the odometer on my 91 Chevy working?
I have a 91 Chevy k1500, 350, 700r4. Neither the Speedo, odometer, nor cruise controls are working. I changed out the inst. cluster and the vss.
Why is there no speedo on my 88-91 truck?
But on the 88-91 trucks the speedo is controlled by the “BRAKE” fuse!! I noticed people riding my tail lately and found no brake lights. Fuse was blown. If you have a trailer wiring or the brake switch goes bad (my case) the blown brake fuse will kill the brake light, cruise, brake unit, AND the speedo servos.
Repair guides and support for C/K pickup trucks sold by General Motors under the GMC brand, including the GMC Sierra. Where is the speed sensor? My 1992 3/4 ton truck 4 wheel drive is throwing a code, 24 speed sensor failure, where do I find this sensor?
Can a transmission speed sensor be removed from a car?
Some speed sensors are internal to the transmission and will require the transmission to be removed from the vehicle before the sensors can be replaced. The most popular service booked by readers of this article is Vehicle Drivetrain Inspection.
What does rough idle mean on a GMC Sierra?
rough idle, stalling, loss of power. o2 sensor code 44 (lean) Replaced: coolant temp sensor, tps, map sensor, fuel filter, and o2 sensor. It will run normal on occasion but only lasts about 45 seconds or so.
Which is the first sensor on the transmission shaft?
The first is known as the input shaft speed (ISS) sensor. As described, this sensor is used to monitor the speed of the transmission’s input shaft.
What causes a GMC Sierra to lose its Stabilitrak system?
There are many things that can cause the StabiliTrak system to lose its ability to function. It is a complex system. Wheel Speed Sensor – If one of the wheel speed sensors is out, your Sierra will no longer be able to tell if all of the wheels are turning at the same speed.
What should I do if my GMC Sierra wont reboot?
It’s a good idea to test and see if you have any trouble codes. They may provide you clues that’ll help you fix it. Gm recommends that you power down the vehicle for 15 seconds to give the StabiliTrak time to reboot. If it works after firing your Sierra back up, great!
Why is traction control not working on my GMC Sierra?
Traction Control Not Working – Your Sierra’s traction control system mostly uses the same sensors to determine if a wheel has broken traction. Unlike StabiliTrak, which controls lateral issues (sliding), traction control keeps the wheels from unnecessary spinning.