Why is the radiator not working on my Honda Civic?

Why is the radiator not working on my Honda Civic?

Just because the radiator fan is not on does not mean that it is not working. They are designed to only run when needed. If your Civic is running hot, and the fan is not running we’ve laid out the most common causes of this issue below. There are a few simple reasons that the fan would not be cycling on.

Why is my Honda radiator fan not working?

If the radiator fan begins working, this is an indication that the fan relay is bad. If the fan switch relay is giving off the appropriate readings and is in working condition, move on to the next step. The thermo switch (also called the cooling fan switch) sends a signal to the cooling fan, so the fan turns on if the coolant gets too hot.

How can I tell if my Honda Civic fan is working?

The fan wiring is some of the more vulnerable wiring in your Civic. You can test the voltage going from the fan relay to the fan itself. If it is getting 12+ volts, the fan should be coming on.

What does the thermo switch on a Honda radiator do?

If the fan switch relay is giving off the appropriate readings and is in working condition, move on to the next step. The thermo switch (also called the cooling fan switch) sends a signal to the cooling fan, so the fan turns on if the coolant gets too hot.

Why is my radiator fan not working on my Honda Civic?

Figure 1. 1999 Civic under-hood fuse box with location of fan relay (circled in red). Another easy way you can check if the radiator fan switch relay is bad is to swap the radiator fan relay with the condenser fan relay. If the radiator fan begins working, this is an indication that the fan relay is bad.

How can I make my Honda radiator fan work?

Place one end of a fused jumper wire on one of the relay’s control terminals. Place the other end of the fused jumper wire on the car’s positive (red) terminal of the battery. Then, touch one end of a regular jumper wire to the other relay’s control terminal. Ground the other end of the regular jumper wire to the vehicle.

If the fan switch relay is giving off the appropriate readings and is in working condition, move on to the next step. The thermo switch (also called the cooling fan switch) sends a signal to the cooling fan, so the fan turns on if the coolant gets too hot.

What should I do if my radiator fan won’t work?

If the radiator fan is in working condition, move on to the next step. The ECT sensor monitors the coolant temperature, and allows the fan to turn on if the coolant is too hot. If this sensor is faulty, a replacement costs around $25 to $45. Follow these steps to test it: Locate the ECT sensor, which is just below the distributor.

How to troubleshoot a Honda Civic cooling fan?

This channel features automotive diagnostics and repairs, videos on new tools and other automotive topics. Be sure to subscribe!

How can I tell if my radiator fan is working?

Here is how to test if the fan is functioning properly: Unplug the radiator fan connector. Run jumper wires between the connector’s two electrical terminals. See Contact Test in Step 1. If the fan does not turn on, you will need to replace it. Figure 3. Radiator fan testing points.

Just because the radiator fan is not on does not mean that it is not working. They are designed to only run when needed. If your Civic is running hot, and the fan is not running we’ve laid out the most common causes of this issue below. There are a few simple reasons that the fan would not be cycling on.

If the radiator fan begins working, this is an indication that the fan relay is bad. If the fan switch relay is giving off the appropriate readings and is in working condition, move on to the next step. The thermo switch (also called the cooling fan switch) sends a signal to the cooling fan, so the fan turns on if the coolant gets too hot.

The fan wiring is some of the more vulnerable wiring in your Civic. You can test the voltage going from the fan relay to the fan itself. If it is getting 12+ volts, the fan should be coming on.

Do you turn the radiator fan on or off?

The coolant temp has to be hot for the fan to come on. Yes, the fan will come on when you turn the A/C on, so that proves the fan works. Leave the A/C off for the rest of the test. Start your vehicle, and let it idle for 10-15 minutes.

How to test if a Honda radiator fan is working?

Here is how to test if the fan is functioning properly: 1 Unplug the radiator fan connector. 2 Run jumper wires between the connector’s two electrical terminals. See Contact Test in Step 1. 3 If the fan does not turn on, you will need to replace it.

Where is the thermostat plug in a Honda Civic?

Figure 2. Location of thermo switch in a Honda Civic’s thermostat housing. The connector has four holes: two are for the electrical wires of the thermo switch plug and the other two are for the plug’s locking mechanism. Make sure to test the electrical holes and not the locking holes.

What should I do if my Honda Civic won’t start?

The check engine light will likely appear if your car won’t start. If the engine won’t turn over, or if there’s no sound from the starter when turning the key, the battery is likely dead. The easy way to test the car battery is with a multimeter. Connect the multimeter to the positive and negative battery terminials.

Here is how to test if the fan is functioning properly: 1 Unplug the radiator fan connector. 2 Run jumper wires between the connector’s two electrical terminals. See Contact Test in Step 1. 3 If the fan does not turn on, you will need to replace it.

When to check coolant level in Honda Civic EX L?

The engine should be cool when you check it in your 2012 Honda Civic EX-L 1.8L 4 Cyl. Sedan About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Honda Civic 2012 Coolant (Antifreeze) / Check Coolant Level Coolant Level Check: 2012-2015 Civic 1. Getting Started – Prepare for the repair 2.

What happens if you take the coolant cap off a Honda Civic?

Always wear safety goggles when working on your Civic. Taking off the coolant reservoir cap on a warm engine could cause the cap to up explosively and fluid to spray out of the reservoir. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Civic for head gasket leakage.

Where is the coolant temperature sensor on a Honda Civic?

So continue reading to keep the ECT sensor in your Civic working as it should. This article applies to the Honda Civic (1992-2000). Your Honda Civic’s engine coolant temperature (ECT) sensor is located in the front right section of your engine block. The engine control module (ECM) uses this sensor to constantly measure the engine’s temperature.

How does the cooling system work on a Honda Civic?

A Honda Civic’s cooling system is a sealed system, meaning that it uses pressure to raise the boiling point of the fluid within the radiator. As the engine operates, the fluid within the radiator circulates throughout the engine.

What causes a Honda Civic engine to overheat?

Most overheating problems with these vehicles can be traced to gasket failure, leaks or to worn components. Twist the radiator cap off of the radiator after first waiting for the engine to cool, then look into the radiator and observe the fluid level. The fluid level should be approximately 1 inch below the top of the radiator.

So continue reading to keep the ECT sensor in your Civic working as it should. This article applies to the Honda Civic (1992-2000). Your Honda Civic’s engine coolant temperature (ECT) sensor is located in the front right section of your engine block. The engine control module (ECM) uses this sensor to constantly measure the engine’s temperature.

Why does my Honda Civic AC not turn on?

If the compressor is not on, the problem could be a matter of power to the system, a bad control head on the dash or no Freon. Start by checking the fuses in the fuse and relay panel under the hood on the drivers side. Replace the fuses as necessary.

Why is my Honda Civic not turning over?

Connect the multimeter to the positive and negative battery terminials. The multi-meter should read above 11.89V at a bare minimum. It should be closer to 12.66V. If it reads low or if the car won’t turn over at all, replace the battery. If playback doesn’t begin shortly, try restarting your device.