How can I FIX MY tail light problem?
As some discovered, re-soldering the connections on the board will solve the problem temporarily, but the area will heat up again over use and cause the circuit board to fail again in no time. To fix the tail light issue for good the Valeo board needs to be replaced by a more efficient LED driver to go in between the source power and the LEDs.
Why are the LEDs on my tail light not working?
This tail light circuit board has an on-board resistors that limit the current going to the LEDs. The power from the battery goes through this board before going to the LED tail lights themselves, making sure a safe, steady current is provided to the LEDs.
When to take your tail light to the mechanic?
If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards. Check the taillight lenses.
Can a traffic officer cite you for a broken tail light?
For a straightforward light or fuse replacement, you can fix your tail lights yourself for a fraction of the price. You can be cited by a traffic officer if your car tail lights are not illuminating or broken, so don’t waste any time.
As some discovered, re-soldering the connections on the board will solve the problem temporarily, but the area will heat up again over use and cause the circuit board to fail again in no time. To fix the tail light issue for good the Valeo board needs to be replaced by a more efficient LED driver to go in between the source power and the LEDs.
Why are my tail lights not working while driving?
Namely, if you leave your car lights on for a long period of time without driving, it will definitely burn your light bulbs. Also, the sun can cause damage to your light bulbs and make them malfunction sometimes. And, as we all know, it is not that simple to find out whether your tail light is burned or not.
Is it dangerous to have a broken tail light?
As we all know, tail lights are quite important and crucial on any vehicle. So, driving with broken tail lights is very dangerous. Actually, people find out about their tail light problem when the police officer pulls them over. This is because the tail light malfunction is not that easy to spot.
How much does it cost to fix a BMW tail light?
Here at LEDSupply we have a $6 part for this tail light repair. Follow the below guide to easily fix the BMW tail light by replacing the constant current driver.
Here at LEDSupply we have a $6 part for this tail light repair. Follow the below guide to easily fix the BMW tail light by replacing the constant current driver.
Why does my tail light keep going away?
If I applied the brakes, the X through a light bulb symbol would go away. It turns out that the light that is farthest outboard in the tail light housing (on both left and right sides) was the problem. They can be a little difficult to pop out because you have to push/pull to the side, not directly out.
This tail light circuit board has an on-board resistors that limit the current going to the LEDs. The power from the battery goes through this board before going to the LED tail lights themselves, making sure a safe, steady current is provided to the LEDs.
If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards. Check the taillight lenses.
What are the benefits of replacing tail lights with LEDs?
There are other benefits to swapping out the incandescent bulbs for LED bulbs. For one thing, probably for the life of the car you will never need to worry again about having to replace a bulb. And you will reduce the chances of getting pulled over by the police due to a burned-out tail light or whatever.
When did Honda change to LED tail lights?
I show how to remove/install a tail light assembly on a Honda Accord. Honda switched to LED tail lights starting in 2006. My car in the video is a 2006 Honda… I show how to remove/install a tail light assembly on a Honda Accord. Honda switched to LED tail lights starting in 2006.
How to install a load resistor for LED tail lights?
This video shows which wires you need to connect your load resistor to in order to restore cruise control to your vehicle. This also corrects hyper flash that is associated with LED tail lights.
There are other benefits to swapping out the incandescent bulbs for LED bulbs. For one thing, probably for the life of the car you will never need to worry again about having to replace a bulb. And you will reduce the chances of getting pulled over by the police due to a burned-out tail light or whatever.
What should I do before replacing MY tail light bulb?
First, be sure to smear a bunch of silicone goop into each socket before you plug in the new bulb. The goop is hydrophobic and so it keeps stray moisture out of the socket and reduces the risk of corrosion and a bad electrical connection. It keeps the metal surfaces unoxidized.
What kind of bulbs are used in tail lights?
Many new cars these days, especially the more expensive cars, use LED bulbs almost exclusively instead of traditional incandescent bulbs. But my car is just old enough, and just inexpensive enough, that all of the tail lights, brake lights, turn signal lights,…
Can you use LED lights on turn signals?
Yes, LED bulbs will work on a vehicle even that old. A replacement flasher relay will be required for the turn signals. Unfortunately, we do not have any full vehicle kits. You would have to remove your original bulbs to see what is there and how many you will need to replace with LED bulbs.