How do you remove serpentine belt on Honda Accord?
Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2. Put the wrench right on the center nut and pull clockwise. While maintaining clockwise pressure on the pulley wrench, slide the worn belt off the pulleys.
What kind of wrench do I need to remove belt on Honda Accord?
A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.
How do you replace the timing belt on a Honda Accord?
Install the timing belt drive pulley. Install the tensioner. Install the water pump pulley. Install the camshaft pulley. Loosen and tighten the adjusting nut to tighten the tensioner belt. Install the timing balancer belt pulley and lower cover. Then, tighten the bolts. Install the crank pulley and bolt.
Can A P / s bolt be removed from a Honda Accord?
Figure 3. P/S bolt and tensioner. The power steering pump can be removed from its bracket to gain more room. The hoses do not need to come off. The alternator as well as its related belt will need to come off in order to gain more clearance to the timing belt and water pump.
Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2. Put the wrench right on the center nut and pull clockwise. While maintaining clockwise pressure on the pulley wrench, slide the worn belt off the pulleys.
A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.
What kind of wrench do I need to replace serpentine belt?
The automatic-tension pulley. A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force.
What happens if your fingers get caught in the serpentine belt?
Be sure that your fingers and your helper’s fingers are completely clear of the belt when the tensioner is released back to normal. The belt is very tight, which will cause a serious injury if your fingers get caught between the belt and pulley. Start the engine and stand clear of the belt.
Why is the alternator belt on my Honda Accord squeaking?
Many vehicles run several components of the motor through a system of belts and pulleys. All of those belts can wear over time, and should certainly be replaced per recommended maintenance intervals. Not replacing the belt can lead to serious damage to your motor.
Why is the belt on my Honda Accord whining?
Not replacing the belt can lead to serious damage to your motor. Often, the telltale sign that a belt is “going” is a noticeable screech or whining sound. It’s caused by the friction of the belt against the pulley.