How do you troubleshoot a stator?
Insert each probe into a stator socket. You should read around 0.2 to 0.5 ohms. If you show an open circuit with the “Open” or infinity reading or have higher resistance, then the stator is bad and you must replace it. If these tests all produce positive results, then the stator itself is good.
Can you jump start a bike with a bad stator?
The engine needs electricity to run the spark plugs, (EFI if you have it), and instruments. If your battery still has juice, you can jump start it and run it till the battery dies, but it will not continue running after that until you fix the alternator. You can’t handle the truth!
What happens if your stator goes bad?
The stator coil generates the power for the spark plug and other accessories on small engines Without a stator there would be no spark at all, meaning the engine won’t run. While a stator is dying, it can produce a weak spark, causing the engine to miss or run poorly.
Can you push start a motorcycle?
The easiest way to push start a motorcycle is to sit on the bike and have 1-2 people push you. This option is not always available if you get stranded by yourself. Insert your key and turn the ignition on (make sure the engine kill switch is also on).
What are the symptoms of a bad motorcycle stator?
The most obvious symptoms of a bad motorcycle stator include no spark, weak spark, or intermittent spark (also known as misfiring). Hard starts and a poorly running engine can also be clues that your stator needs to be rebuilt or replaced. In this article we will dig into these symptoms and what causes them.
What happens to the spark plug when a stator goes bad?
What should I do if my Honda stator is weak?
Note that as written this system will bypass the CDI portion of your ignition system (if present) and replace it with a more traditional one. I devised this system when the stator on my Honda XR-100 got so weak that it couldn’t power the spark plug, preventing the engine from running.
What is the stator resistance of a Harley Davidson?
22 amp system produces about 19-26 vac per 1,000 rpm, stator resistance is about 0.2 to 0.4 ohms. 32 amp system produces about 16-20 vac per 1,000 rpm, stator resistance is about 0.1 to 0.2 ohms. 45 amp system produces about 19-26 vac per 1,000 rpm, stator resistance is about 0.1 to 0.2 ohms. Step 1.