How many gallons of unleaded gas into a diesel tank?
On the way home from the Bristol Meet in my 2000 Ford Excursion 7.3 turbo-diesel, pulling a 4000 lb trailer and 1934 Buick, — started the pump, and in a hurry to get to the restroom — the pump cut off at $100. About to restart it, I noticed that I had pumped over 26 gallons of 93 octane UNLEADED instead of DIESEL !
How do you refill a jet fuel tank?
Jet fuel is dispensed with an entirely different setup, usually from a fuel truck and the nozzle would never come close to fitting anything but an aircraft. Also, a complete teardown would not be required. Just drain the offending fuel and refill with gasoline and Bob’s yer uncle.. I think your colleague was pulling your leg.
Where does the sludge go in a fuel tank?
In the majority of fuel tanks most of the water and sludge will be below the draw-off point but it will be agitated by the movement of the car so that water and lengths of fine microbial threads enter the fuel pipes and carburettor. Water will pass through but the threads may become attached in the filters and jets.
What to do if your petrol tank is stale?
If the problem continues they might drain the tank, removing some of the sludge, and refill with fresh petrol, but this only offers a temporary solution as microbial residues and water molecules remain in the tank and will quickly contaminate the new supply.
What happens if you have a 50 gallon fuel tank?
If you have a 50 gallon tank, a 1,000 gallon tank, or a 50,000 gallon tank, the fuel being pulled out is displaced by air drawn in through a vent. Without this mechanism, the tank could collapse. What We’ve Learned… In addition, above ground tanks generally present another problem.
How is fuel pulled out of a fuel tank?
If you have a 50 gallon tank, a 1,000 gallon tank, or a 50,000 gallon tank, the fuel being pulled out is displaced by air drawn in through a vent. Without this mechanism, the tank could collapse.
What does it mean when your gas tank is full?
This may also take the form of a sputter. If your gas tank is full and your car still sputters when you hit the accelerator pedal, this could indicate water-contaminated fuel. The best way to remove all water from the gas tank is to drain and refill your gas tank.
What kind of filter does a fuel tank breather use?
WATER VAPOR ADSORBENT — Silica gel adsorbs water from incoming air and can hold up to 40% of its weight. Condition is indicated by change of color from blue to light ink. FILTER ELEMENTS — Polyester filter elements at the top and bottom of the breather remove airborne contamination.