What is Maint req light?

What is Maint req light?

What Is the Maintenance Required Light? The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop.

How do I reset my oil change?

Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.

How do you reset the maint REQ light?

These are the steps: Turn the ignition switch to the OFF position. Press and hold the SELECT/RESET button. While holding the button down, turn the ignition switch to the ON position (but without cranking or starting the engine). Hold the SELECT/RESET button for about 10 seconds. After 10 seconds, the MAINT REQ’D light will reset and turn off.

When does the maint REQ’D light go out?

When the mileage driven reaches between 8,000 to 10,000 miles, the MAINT REQ’D light will illuminate for 2 seconds and then blink on and off for 10 seconds then it’ll go out. When the mileage driven exceeds 10,000 miles the MAINT REQ’D light will illuminate and stay on as long as the ignition switch is in the ON position.

When does the Honda Civic maint REQ’D light go off?

After 10 seconds, the MAINT REQ’D light will reset and turn off. The MAINT REQ’D light is designed to illuminate (whenever the engine is running) after 10, 000 miles. After the MAINT REQ’D light is reset, it will illuminate when the ignition switch is turned on then will go out after 2 seconds.

How do you reset the maintenance light on a Toyota?

Nearly every make and model year of Toyota brand vehicle has the same process to reset the maintenance required light. Turn the key to the on position with the odometer showing. Press and hold the odometer button. Turn the key to the off position while still holding the odometer button.