What is the function of the front axle?
It gives steering facility and absorbs shocks. The weight of the front part of the vehicle is transmitted to the road surface through front wheels by the front axle of a vehicle. It also houses the mechanism for steering the vehicle to absorb shocks due to road surface variations.
Is the front axle a dead axle or a live axle?
Dead front axle. Generally, the front axle is a dead axle. In heavy vehicles and most of cars, the front axle is a live axle. These types of axle are used in modern cars and heavier vehicles. The front axles are called as dead axles when they do not rotate but live axles transmit power to rear wheels.
What are the different types of axles in a car?
Types of Axles 1 Rear Axle. In between the differential and the driving wheels is the rear axle to transmit power from the differential to the driving wheels. 2 Front Axle. The front axle is used to carry the weight of the front part of the vehicle as well as to facilitate steering and absorb shocks due to road 3 Stub Axle. …
What kind of material is a front axle made of?
It is made of I-section in the centre portion, while the ends are made either circular or elliptical. With this construction, it takes bending loads due to the load of the vehicle. Also, the torque centre portion is given a downward sweep. The different components of the front axle are the beam, stub axle, swivel pin and track rod.
How does a front axle work?
Front Wheel Drive Axles (FWD) FWD axles transfer power from the transaxle differential to the hubs and wheel of a vehicle. They are commonly referred to as “axle shafts” or “front drive shafts.” They turn significantly slower than a rear wheel drive vehicle’s drive shaft. The speed can be measured at approximately 1/3 of a rear wheel drive shaft.
What is the front axle of a car?
A front axle is a rotating shaft at the front of a vehicle that turns the front wheels. Vehicle design can be quite variable, and axles come in a range of formats and designs to meet different needs.
What is front axle shaft assembly?
A front axle assembly is the unit that connects two wheels at the front of a vehicle, and allows those wheels to rotate freely and sometimes independently. Very simple front axle assembly models may not include much beyond the axle, axle housing, and bearings to allow the axle itself to rotate,…
Are FWD axles and AWD axles the same?
The FWD driver side axle goes right from the diff to the hub, and it’s one piece, about 2.5?feet long. The AWD driver side axle has an intermediate shaft that comes from the diff into a bracket that bolts to the back of the block, then to a shorter axle that extends to the hub. With the AWD front axles, both “axles” are equal length, opposed from the intermediate shaft on the drivers side. FWD DSM’ers upgrade to AWD axles because they are of equal length, and yield less torque steer.