What should I do if my CD player is stuck?

What should I do if my CD player is stuck?

Grab a blank or useless CD. This method involves inserting a second CD into the player, so, to prevent damage to a beloved album, try to procure a blank CD or one that you otherwise don’t care about. Turn the CD player on before proceeding. If this requires you to start the car, then start the car and turn the CD player on.

How do you get a CD out of a car stereo?

Press your CD player’s power and eject buttons down at the same time, holding them for about ten seconds. If your stereo has a “force eject” feature, it should spit out the CD.

Why is my CD player not working in my car?

Some CD players may not function when the car is turned off. For these players, try pressing and holding the power and eject buttons while the car is running. Consult the player’s manual.

Why is my CD player not ejecting the CD?

Sometimes a CD will not eject because the mechanism to eject the CD doesn’t have a good grip. This may be especially true in older vehicles where the CD player has been used frequently. One way of helping the CD player get better grip is by using a second CD.

What causes a CD to get stuck in a car player?

A stuck CD may be caused by a non-functioning or weakened motor that doesn’t have enough power to push the CD out of the player. The additional assistance from pliers or tweezers may create enough force to eject the CD. Step 1: Insert the tweezers to grab the CD.

What’s the best way to remove a stuck CD?

You may be able to remove a stuck CD using more conventional tools like tweezers or needle-nose pliers. Tweezers or pliers may allow you to get better leverage and pulling power. A stuck CD may be caused by a non-functioning or weakened motor that doesn’t have enough power to push the CD out of the player.

Press your CD player’s power and eject buttons down at the same time, holding them for about ten seconds. If your stereo has a “force eject” feature, it should spit out the CD.

What should I do if my CD player doesn’t work?

Turn the car off. Some CD players have a “force eject” function that’s specifically designed to get CDs out when other methods have failed. Because this method doesn’t require you to tamper with your CD player in any way, it’s smart to start here – you have nothing to lose if it doesn’t work.

What kind of CD changer do I Need?

Alpine 5956 CD Shuttle Compact 6 Disc Changer JUBA Vintage Old School Japan! Only 1 left! Kenwood cd auto changer kdc-c667 Vintage 6 disc. Open box, *No Cable*

How to get a CD unstuck from the 6 disk changer?

(Theres’s a “risky” variation of this tip described in the Multiple (6-disk, etc.) Systems section of the guide for attempting to fix a CD changer) ◊ Turn your ignition on to the accessory position. Hold the eject button down for 2 or 3 minutes. Depending on your make/model, the eject button may flash.

Why is my CD player stuck in my Forester?

I’m brand new here, don’t have a Forester myself, but have been wrestling with friend’s 2007 Forester and the 2 CDs that were stuck in the changer. Ended up pulling the unit and manually extracting both CD’s, which were TRULY jammed in it, and it wouldn’t play or accept anything after that was done.

What to do if your 6 disc CD player locks up?

Mine is an 07 6 disc cd, sateline, fm, am, with the aux, double din. I’ll pm you as well. It is a common problem for the 6 disc to lock up. Disconnect your battery for a few minutes and it basically does a soft “reset” of the unit. It cures the problem 90% of the time.

How do you get a CD out of a CD player?

Or use a blank one if that’s all you have. Insert the coaster about an inch into the slot (yes, on top of the stuck CD). Then turn the ignition on and hold the eject button and wiggle the CD around. Don’t be hamfisted – you’re just trying to give the player some traction to help it eject the stuck one.

How to remove jammed CD from 2008 MDX Tech?

Put the rag on the console so when you pull the stereo out, it is on top of the rag and not scratching your console. Pull the stereo straight out. There are a bunch of plugs on the back. Undo them all. Each one has a lock tab you press, then pull the plug out. Always pull on the plastic plug itself, never pull the wires.

How do you remove a CD from an Acura MDX?

2. Remove Stereo System. Open front right door. Take your plastic trim prying tool and carefully pry open the panel at the right end of the dash. it un-snaps along the three sides and kind of hinges open at the door pillar, then you can simply pull it off.

Put the rag on the console so when you pull the stereo out, it is on top of the rag and not scratching your console. Pull the stereo straight out. There are a bunch of plugs on the back. Undo them all. Each one has a lock tab you press, then pull the plug out. Always pull on the plastic plug itself, never pull the wires.

2. Remove Stereo System. Open front right door. Take your plastic trim prying tool and carefully pry open the panel at the right end of the dash. it un-snaps along the three sides and kind of hinges open at the door pillar, then you can simply pull it off.

What to do if your CD player is stuck?

If your car CD player is not working and give you an error and a CD is stucked, it can be very frustrating, but don’t worry in this video I will try to show you the different ways you can remove it. If you follow the instruction in this video your CD may get damaged. So make sure you use a blank Cd that you don’t need. Loading…

As with all do-it-yourself repairs, there is a potential risk of damaging the CD player. This article provides both invasive and non-invasive strategies aimed at limiting the risk of causing further damage to your car’s stereo. Sometimes you can free a stuck CD by resetting the electrical system connected to the radio.

How do you remove a fuse from a CD player?

To replace the fuse, find the corresponding fuse for the CD player. Usually the fuse box has a front panel which shows the locations of each specific fuse. Step 2 Remove the correct fuse. To remove a fuse you’ll want to use a pair of needle-nose pliers or a fuse puller. Fuses can sometimes be difficult to remove.

How to remove a CD jammed in a car player?

Step 2: Insert the second CD. Slide the second CD about 1” inch into the CD disk slot. At this point, the second CD should rest on top of the first. By doubling the thickness, the releasing mechanism may be able to get a better grip on the original CD. Step 3: Push down gently on the first CD.

How do you remove a CD from a car?

Step 2: Open your hood and identify the battery. Once you’ve open the hood, locate the battery and identify the positive (red) and negative (black) terminals. Step 3: Disconnect the negative terminal of the battery. In order to disconnect the terminal you may have to use a wrench or pliers.

Do you need a Bose set up CD?

Included: Bose Set Up CD. This must-have disc allows your existing Bose Wave Music System to recognise and work with this new Bose 3 CD changer, Please Note: You must already own a Bose Wave Music System in order to use this CD changer. This changer lacks the ability to work as a stand-alone unit. Thank you. How does Amazon calculate star ratings?

Where to mount a CD changer in a car?

Installation involves finding a spot to mount the changer, such as in the trunk (if you have one), in the front console, or under a seat. Installation will be simplified if you can mount it inside the vehicle cabin, rather than in the trunk, because it will be easier to route the cables.

Can you connect an aftermarket CD changer to a factory stereo?

Integration adapters let you connect an aftermarket changer (usually from Alpine, Kenwood or Panasonic) directly to your factory stereo. These adapter cables are not universal. Each one is made to work with a specific brand and model of changer in a specific vehicle. How do you know if one of these options will work for you?

How does the Bose Wave multi CD changer work?

Enjoy extra hours of uninterrupted CD music, courtesy of the Bose Wave Music System Multi-CD Changer. Add it to your existing Bose Wave Music System (not included in this sale) and you’re able to listen to three more CDs or MP3 CDs–your Bose Wave Music System and this Multi-CD changer work together as one!

How do you get a CD out of a jammed CD player?

You will need an extra pair of hands; so get someone to help you. Insert a blank CD about 1 inch deep into the jammed CD slot. First try inserting the blank CD above the stuck CD. Your help should press the ‘eject button’ in, while you try to move the stuck CD around and out. Try wriggling or moving the stuck CD downwards.

What’s the best way to eject a CD?

Step 2: Press the eject button. While pressing the eject button at the same time, pull on the CD with the pliers or tweezers. Pull gently at first, then with more pressure as needed. If you notice any unusual noises while attempting this method, stop and try another method.

How do you put a popsicle stick in a CD player?

Step 1: Wrap two-sided tape around the popsicle stick. Make sure the tape is thin enough so that you can still fit the stick in the CD player. Step 2: Insert the stick in the CD player. Insert the taped stick about 1” inch into the CD player and push down. Step 3: Pull the CD gently back towards yourself.

What to do if your CD player is stuck in your car?

If none of the above methods or techniques work, you may have to take your car to the car dealer for an in-warranty repair or consult an auto-technician shop. A mechanic can remove the entire stereo unit or CD player, unscrew the top and remove the CD stuck in the car CD player.

You will need an extra pair of hands; so get someone to help you. Insert a blank CD about 1 inch deep into the jammed CD slot. First try inserting the blank CD above the stuck CD. Your help should press the ‘eject button’ in, while you try to move the stuck CD around and out. Try wriggling or moving the stuck CD downwards.

How do you remove a CD from a CD player?

Insert the knife, with its sticky side down, into the CD slot, above the stuck CD. Touch the CD top with the sticky end of the knife. Try to touch as much of the CD as possible with the knife, not just the tip.

Step 1: Wrap two-sided tape around the popsicle stick. Make sure the tape is thin enough so that you can still fit the stick in the CD player. Step 2: Insert the stick in the CD player. Insert the taped stick about 1” inch into the CD player and push down. Step 3: Pull the CD gently back towards yourself.

As with all do-it-yourself repairs, there is a potential risk of damaging the CD player. This article provides both invasive and non-invasive strategies aimed at limiting the risk of causing further damage to your car’s stereo. Sometimes you can free a stuck CD by resetting the electrical system connected to the radio.

To replace the fuse, find the corresponding fuse for the CD player. Usually the fuse box has a front panel which shows the locations of each specific fuse. Step 2 Remove the correct fuse. To remove a fuse you’ll want to use a pair of needle-nose pliers or a fuse puller. Fuses can sometimes be difficult to remove.

Why is my CD ROM not working on Windows 98?

Windows 98 users. If the above recommendations have been attempted, try booting from a Windows 98 diskette or other bootable diskette with CD-ROM drivers to see if the CD-ROM works from MS-DOS. If the CD-ROM does work from MS-DOS, this indicates that you have a corruption issue with Windows.

How do you get a CD out of a car player?

Find a paperclip and bend it so that several inches of it are straight. Step 3: Engage the catch release with the paper clip. Find the hole for the catch release and push the paperclip into the hole. After engaging the catch release, the CD should pop out part of the way so that it can be pulled out.

Where is the fuse box on a car CD player?

Check your owner’s manual – often, a car’s fuse box will be behind a panel somewhere on the driver’s side of the dashboard. Disconnect the battery, remove the fuse box’s protective covering, then, consulting your owner’s manual, replace any of your CD player’s fuses that may have blown.

Grab a blank or useless CD. This method involves inserting a second CD into the player, so, to prevent damage to a beloved album, try to procure a blank CD or one that you otherwise don’t care about. Turn the CD player on before proceeding. If this requires you to start the car, then start the car and turn the CD player on.

Check your owner’s manual – often, a car’s fuse box will be behind a panel somewhere on the driver’s side of the dashboard. Disconnect the battery, remove the fuse box’s protective covering, then, consulting your owner’s manual, replace any of your CD player’s fuses that may have blown.

Some CD players may not function when the car is turned off. For these players, try pressing and holding the power and eject buttons while the car is running. Consult the player’s manual.

How to repair a CD player in a Saab 9-3?

This video shows how to remove and repair the CD unit in a Saab 9-3 (model year 2004). The repair is focused on a problem where the CDs do no load, or are stuck and do not eject from the CD player. You could also use this video to get to the point of disassembly required to replace a failed laser (since we have to take most of the unit apart).

This video shows how to remove and repair the CD unit in a Saab 9-3 (model year 2004). The repair is focused on a problem where the CDs do no load, or are stuck and do not eject from the CD player. You could also use this video to get to the point of disassembly required to replace a failed laser (since we have to take most of the unit apart).

What’s the problem with my Subaru CD player?

12/3/2009 Subaru Mechanic: Don – Mo Lurch, Subaru Mechanic replied 11 years ago Don – Mo Lurch, Subaru Mechanic Category: Subaru Satisfied Customers:23,267 Experience: Heavy Line Mech, Race Shop Owner, Mobile Electronics. Verified Sorry to say there is no customer fix, unless you have experience in changing out CD Mechanism.

How to install aux in cable on VW Polo?

The “credit card” method suggested in the next part didn’t work for his Polo. He found that it is just necessary to pull the frame towards the driver, and that the best place to start is from the bottom and not the top. Once released the bottom, one proceeds (carefully) with the two sides, and the frame can be extracted. The clip in the frame.

Why is there no red light on my CD?

A piece of paper the size of a standard CD within the tray can also help, because when the tray closes, one can see the diffused red light on the paper. It is usually bright enough and visible from the other side of the paper. If there is no red light, then the laser has failed.