Where is the computer on a 97 Honda Accord?
And the computer is located behind the center console here, and held down on either side by these 10 millimeter fasteners. Unplug the electric connection, and remove the fastener. Knock them around to the other side, pull the carpet back, and that will expose this side of the computer.
Where is the ECU in a Honda?
On all fifth and sixth generation Honda Civics, the ECU is located behind the kick panel in the front passenger’s side foot well. To remove the ECU and view its bar code label, use a ratchet and socket to unbolt it from the sidewall. Disconnect the wire harnesses of the ECU before completely removing it.
Where is the ECU located on a Honda Civic?
Here is the location in the vehicle for most Honda Civic/CRX ecus. Most of the time, it is in the location pictured below. This happens to be true for the Civic models, while Accord models have it at the bottom of the center console.
Where is the ECM located on a Honda Accord?
Some models use an ECM (or ECU) for the engine and one for the automatic transmission (TCM or TCU) and some other models use one module for both things (PCM). You located the module, but not sure if it is the engine ECM? You can make sure by checking the part number of the box.
Where to reset the ECU on a Honda Accord?
If any of these problems are affecting your Civic or Accord, it is very simple to reset the ECU. Keep reading and this how to will guide you through the process. Open the hood and look for the fuse box, which is located near the passenger’s side. The cover contains a diagram of the fuses, which tells you what each fuse is used for and the amperage.
How do you take cover off Honda ECU?
Remove the cover on the fuse box by pulling the tabs outward and lifting up. Set the cover aside. Figure 1. Locate and remove the cover on the fuse box.
Here is the location in the vehicle for most Honda Civic/CRX ecus. Most of the time, it is in the location pictured below. This happens to be true for the Civic models, while Accord models have it at the bottom of the center console.
Some models use an ECM (or ECU) for the engine and one for the automatic transmission (TCM or TCU) and some other models use one module for both things (PCM). You located the module, but not sure if it is the engine ECM? You can make sure by checking the part number of the box.
If any of these problems are affecting your Civic or Accord, it is very simple to reset the ECU. Keep reading and this how to will guide you through the process. Open the hood and look for the fuse box, which is located near the passenger’s side. The cover contains a diagram of the fuses, which tells you what each fuse is used for and the amperage.
What happens to the engine control module on a Honda Accord?
Your Honda Accord engine control module (ECM) keeps motor functions operating with precision. When your Accord engine control computer fails, get a new one from AutoZone and have harmony with the road. Today’s small-car engines are producing lots of power despite their condensed sizes.