Where to insert switch 2 in VW Jetta?
– Insert switch -2- (or switch -3-) into vent and engage. fPage 174 f- Place sufficient lint-free cloths under the ABS control module and hydraulic unit – fRemove brake lines -3- on the side of hydraulic unit CAUTION: DO NOT BEND BRAKE LINES IN THE AREA OF THE HYDRAULIC UNIT.
How to turn on ignition on Volkswagen Jetta?
Switch ignition on and select engine control module with “Address word” 01. (Connecting scan tool and selecting engine control module).
How to check the wiring of a VW Jetta?
Using the test box V.A.G 1598/18 the wiring can be checked according to the wiring diagram. NOTE: – Before connecting test leads the correct measuring range on the tester must be adjusted. Otherwise the electronic components can be destroyed! – Use the multimeter V.A.G 1526 with auxiliary cables from V.A.G 1594 for testing.
What are the parts numbers on a VW Jetta?
Engine Control Module Adapting to Throttle Valve Control Module fPage 62 – Antenna cables – Touareg 2004 > 2006 Tip: Part numbers listed in this bulletin are for reference only Always check with your Parts Dept. for the latest parts information. fPage 326 fWHAT ARE TRACKS?
Are there any modifications to the VW Jetta?
In fact, over the past 15-20 years of playing with these cars, so many parts combinations have been tested that—for all intents and purposes—ALH Jetta performance has been nailed down to a science. From high-flow injector nozzles to drop-in turbo upgrades and performance camshafts to custom tuning, everything is available for them.
Is there a block heater for a TDI?
TDI engines don’t have frost plugs so there’s no engine block heater available. The VW OE engine coolant pre-heater is only available option in Canada. So, you can do a DIY using a zerostart heater + 1 or 2 hoses & hose clamps, from the local auto part stores.