Why does my Chevy Blazer have a yellow warning light?
A night before i set on a journey from Switzerland to Germany my car show yellow warning light which warn about fuel, power etc the symbol look like a videocamera diagram. After about 3 hour drive the car stop to accellerate. I listern to the fuel pum sound it sound fine but road patrol said the fuel dont run to injector.
What causes acceleration in a 97 Chevy Blazer?
97 chevy blazer 4.3 idles great but upon acceleration it starts to surge, changed just about everything, fuel pump,cap rotor, wires, plugs distributor injectors, crankshaft, cam, throttle pos. sensor, tried new computer, at a loss starts right up and idles great, take in down the road and starts surging. Exhaust?
What to do when your traction control warning light comes on?
If a fluke in the TCS system triggered the warning light, it should turn stay off when you restart the engine. If it comes back on, it’s likely time to call a mechanic and get a system diagnosis. Until it’s fixed, drive gently and avoid hard acceleration that could result in the wheels slipping.
When does the TCS warning light come on?
The TCS warning light will pop on when the system detects a loss of traction, like in snowy or rainy weather. Typically the light is seen when the system intervenes to maintain traction. It may light up for a brief period and then go off, or it may flash while it is operating.
Is the 4×4 light on on my Blazer?
I read what you said about the wires on the Blazer, but mine were not corroded. I took it off and cleaned it up anyway and it came back on, but as soon as I turned the key off she was gone again. I don’t have any lights lighting up on the 4×4 switches. Service 4X4 light is on in the dash. I don’t know what is going on.
Is there a problem with my Trailblazer 4 wheel drive?
This is really making me mad i got the dash lights back on so know all I have to worry about is this 4wd it seems like trailblazers have issues with 4wd problems I had a 99 chevy s10 zr2 and it had 4wd problems I think chevy needs to relook at this known problem and recall them all. No there is no power to the actuator.
Why is my Blazer still picking up speed?
2) The Blazer still picks up speed and drives well except for the rubbing/vibration now. Would having pulled out and put back in the dash switches or being in such close proximity to the TCCM caused issues?
Is the 4Lo button on a blazer working?
I also now notice (in testing it) that the Auto 4WD, 2HI, and 4HI buttons work, but that the 4LO button just blinks when pushed (in neutral). I have to push one of the other buttons to get out of it.