How do you align Subaru headlights?
How to Adjust Subaru Legacy Headlights
- Park your car on a flat surface with your headlights turned on and pointed at a smooth wall that is roughly 25 feet away.
- Lift the hood of your car, securing it open with the prop arm.
- Measure the height from the ground to the middle of your headlight with your measuring tape.
How do I adjust the headlight beam on my Subaru?
Make certain that someone is seated in the driver’s seat. Cover the headlight that is not being adjusted with a cloth. Turn the headlights on and then adjust the low beam while displaying the beam on the screen. NOTE: Adjust the vertical beam level (A) first, then horizontal beam level (B) using a screwdriver.
What’s the best way to adjust your car’s headlights?
If all you can see is the foliage on the side of the road, or oncoming drivers are constantly flashing their high beams or honking their horn at you, most likely your headlights are misaligned and giving those other drivers an eyeful. They’re easy to adjust with a few measurements and a screwdriver. Level your car.
How do I change the headlight bulb on a mitsubisi Triton?
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall. You can’t post conmments that contain an email address.
How tall should the headlights be from the wall?
These center lines should be no higher than 3.5 feet (1.1 m) from the ground. Back your car exactly 25 feet (7.6 m) from the wall or garage door. Don’t estimate the distance! Use a tape measure to make sure you are the proper distance away from the wall. Turn off the headlights.
Make certain that someone is seated in the driver’s seat. Cover the headlight that is not being adjusted with a cloth. Turn the headlights on and then adjust the low beam while displaying the beam on the screen. NOTE: Adjust the vertical beam level (A) first, then horizontal beam level (B) using a screwdriver.
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall. You can’t post conmments that contain an email address.
Why is it important to align your headlights?
Headlights that aren’t properly aligned can impair the vision of other drivers by shining into their mirrors. Among other things, correct headlight alignment is important for your own safety and ability to see signs or obstacles on the road.