Is phono the same as line level?
What is the difference between PHONO and LINE? There are two main differences between PHONO and LINE. A PHONO signal is typically 0.005 Volt and a LINE signal is typically 0.3 Volt. Secondly, the lower tones (bass) of a PHONO signal is significantly reduced (RIAA equalized) while this is not the case for a LINE signal.
Should my turntable be set to phono or line?
Answer: Setting up your Audio-Technica turntable properly will ensure that you get the most out of your listening experience. The PHONO/LINE switch turns the turntable’s internal RIAA preamp off/on, thus providing the correct equalization for your turntable’s current setup.
Is phono input the same as aux?
Phono inputs are not the same as AUX inputs. In fact, you can’t use them interchangeably. AUX inputs provide a clean input, while Phono inputs have internal equalizers. Also, you need to have a sound signal for a Phono input, and this signal comes from a cartridge.
What is Phono input in a receiver?
(PHONOgraph input) A socket on an amplifier or receiver that accepts signals from an analog turntable. The phono input circuit boosts the signal and provides the RIAA equalization necessary to restore the original sound.
What is a phono level input?
A phono input is an audio input that can be found on a preamplifier, an amplifier, or a stereo receiver. This type of audio connection accepts signals from analog turntables, which boosts and adds RIAA equalization to recreate the original sound.
What is a line level input?
Line inputs are designed to accept voltage levels in the range provided by line outputs. These “Hi-Z” or “instrument” inputs generally have higher gain than a line input. They are designed to be used with, for example, electric guitar pickups and “direct input” boxes.
What does line in mean on my record player?
Line in or line-in is a jack found on computer sound cards enabling users to connect an external audio device. These devices include CD players, audio mixers, musical instruments, and microphones. They’re used to record, play, and modify the incoming audio.
Is phono input or output?
This “phono input” designed for the millivolt signal from an unamplified turntable should not be confused with the modern standard one-volt line input and output that also uses RCA connectors and is found on video cameras, recorders and similar modern equipment.
Can phono be used as aux?
If you have a “phono” input, plug your turntable in there – you won’t need a phono pre-amp. If that’s the case plug the turntable into a spare input, like the auxiliary or “aux” ports. Don’t plug it into a “phono” input or you may blow your speakers up.
What is phono level input?
Phono input is a set of input jacks, usually mini jacks or RCA connectors, located on the rear panel of a preamp, mixer or amplifier, especially on early radio sets, to which a phonograph or turntable is attached.
What is the use of phono input?
Can a line level be converted to a phono input?
Nowadays phono inputs are largely unused because vinyl record players are getting rare. This circuit is is a simple converter to convert line level signal (0..1 V) to phono input levels (0..5 mV), which makes it possible to use those inputs as an extra line input.
What are the functions of a phono input?
Phono input compatibility: moving magnet and high output moving coil type inputs (= compatible with most receivers and integrated amplifiers) The circuit does two functions: signal level attenuation and inverse RIAA filtering. The signal attenuation is needed to convert the 500 mV signal to 2.5 mV signal.
Why does a phono sound different from a line?
And, as many of us have experienced, if we connect a PHONO signal to a LINE input on a stereo receiver, the music will have almost no volume and sound very strange with no bass at all. This is due to the low signal level and the reduced bass of the PHONO signal.
What should the phono signal level be on a turntable?
Typical PHONO signal levels range from 0,2 mV (0.0002 Volt) for a very low output cartridge to 7 mV (0.007 Volt) for a high output cartridge. For most mainstream cartridges (and turntables) the PHONO signal level will be around 5 mV.