Is there a spark in my GM Truck?
Yes, that too would be an issue. However, you would get nothing when trying to start, let alone a spark issue. So I am having the same problem, and thought maybe I had a ground issue.
Can a 1999 Chevy c1500 / k1500 start?
Hi, our 1999 CHEVROLET C1500/K1500 is having the same issue. After sittiing for a few hours, we have to crank it and eventually put a little gas or tarting fluid in the throttle body for our truck to start but runs and drives fine once it does start and will start right up after only sitting for about an hour or so. 205 people found this helpful.
Why is there no spark in my ignition?
An ignition module requires some type of external input in order to activate. If your vehicle stalls unexpectedly during operation and will not start again, it is likely because of loose or corroded electrical connections in the ignition module. In this case, check the switch, clean oxidized terminals, and replace broken wires if necessary.
Can a bad ground connection cause no spark?
If you have a bad Ground connection, and it looses connection while the engine is running, the Ign. Con. Mod. with fry. I am having the same problem. I don’t know much about engines and am learning as I go, but would a bad ground to the battery have an issue with spark?
Why does my 93 Sierra have no spark?
You can’t post conmments that contain an email address. Fuel, Spark, crank – no start I have a 93 Sierra White, was running when parked. Picked up another Sierra that was missing under load, was swapping parts found 3 cracked plugs, and bad wires and the fuel pump vapor locking.
Why is my Vortec 5.7 not sparking?
Went and stuck it back together it, new cap new rotor wires will crank, spark and fuel but can’t get it to start. Triple checked firing order, can see gas in the throttle body am stumped. Any ideas of what this problem could be?
An ignition module requires some type of external input in order to activate. If your vehicle stalls unexpectedly during operation and will not start again, it is likely because of loose or corroded electrical connections in the ignition module. In this case, check the switch, clean oxidized terminals, and replace broken wires if necessary.
How does a spark plug ignite an engine?
Central Electrode – From the terminal cap, the electrical charge passes through the metal conductor core to deliver the spark that ignites the gases in the engine’s combustion chamber. After the mixture explodes, the plug emits heat away from the engine (thermionic emission) via the same conductive core.
You can’t post conmments that contain an email address. Fuel, Spark, crank – no start I have a 93 Sierra White, was running when parked. Picked up another Sierra that was missing under load, was swapping parts found 3 cracked plugs, and bad wires and the fuel pump vapor locking.
What kind of problem does a 1997 GMC pick up have?
1997 GMC K1500, K2500, K3500 Pick Up. All of the information you need to diagnose a misfire or a no-start problem (caused by the ignition coil, the ignition module, or the crankshaft position sensor). Wiring diagrams.
What was the ignition module for a 1996 GMC k1500?
1996 GMC K1500, K2500, K3500 Pick Up. All of the information you need to diagnose a misfire or a no-start problem (caused by the ignition coil, the ignition module, or the crankshaft position sensor). Wiring diagrams.
Yes, that too would be an issue. However, you would get nothing when trying to start, let alone a spark issue. So I am having the same problem, and thought maybe I had a ground issue.
1997 GMC K1500, K2500, K3500 Pick Up. All of the information you need to diagnose a misfire or a no-start problem (caused by the ignition coil, the ignition module, or the crankshaft position sensor). Wiring diagrams.
1996 GMC K1500, K2500, K3500 Pick Up. All of the information you need to diagnose a misfire or a no-start problem (caused by the ignition coil, the ignition module, or the crankshaft position sensor). Wiring diagrams.
What makes a 1997 GMC C2500 no start?
1997 GMC C1500, C2500, C3500 Pick Up. 1997 GMC K1500, K2500, K3500 Pick Up. All of the information you need to diagnose a misfire or a no-start problem (caused by the ignition coil, the ignition module, or the crankshaft position sensor).