Is there a way to reset the PassLock system?
To cope with this pesky glitch you can reset the passlock system when starting your car. Insert your key in the starter, start you car as you usually would and let it stall.
Why does my PassLock not work on my car?
The following information can help to determine the cause of the problem. The PASSLock system does not disable the starter; it only disables the fuel after the engine has started. If the vehicle will not crank, PASSLock cannot cause this condition. If the vehicle starts, but stalls quickly, this condition can possibly be related to PASSLock.
How do I Turn Off the PassLock sensor?
•The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK. The vehicle learns the Passlock Sensor Data Code and/or resistance on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.
Can You disable the PassLock on a GM car?
The following instructions will allow you to disable the PassLock security in quite a few GM Vehicles. •This will allow you to install a remote starter and not have to purchase a bypass. •Avoid Costly repairs for an already broken PassLock System.
To cope with this pesky glitch you can reset the passlock system when starting your car. Insert your key in the starter, start you car as you usually would and let it stall.
What is the system fault code for PassLock security?
When the sensor defect starts, it usually presents itself as system fault code B2960. A red (or yellow) “security” warning light will stay illuminated and the engine will either a) never start or b) start for a moment and then shut down.
Why is my PassLock not working on my GM car?
However, it isn’t uncommon for GM car owners to experience glitches with their passlock system when trying to start their vehicle. When this occurs, you will see the security (Theft Sys) light being displayed randomly, plus you won’t be able to start your vehicle.
What to do if your PassLock light does not turn on?
Insert the Key into the ignition switch and try to start the car. It should start, and then stall, with the “SECURITY” light flashing. (In rare cases, the car may keep running and the security light will not illuminate, but that only happens if you are very lucky.)