What do you plug into the OBD port?

What do you plug into the OBD port?

Plug a module into the OBD port, and you’re effectively patching into the vehicle’s engine control module, or ECM, which is the vehicle’s computer brain. The OBD port is a specialized connector with many individual pins and wires connected to that ECM.

Where is the mini plug on my computer?

In the back of the computer, connect the mini plug to the audio line-level output. This port is usually colored lime green, as in the picture at right.

What kind of ports do you need for a headset?

Typically, 3.5 mm audio-out ports also support audio-in (e.g., microphones). 3.5 mm microphone – Some headsets have a separate 3.5 mm jack for audio input as well. These are usually pink.

Where are the headphone ports on my computer?

Locate your computer’s audio inputs. Laptop PCs typically have the 3.5 mm audio-out port on the left, right, or front side of the housing, while desktop PCs may have these ports on the front or back of the CPU box. Microphone ports are usually pink, while headphone ports are usually green.

Can you plug in a base management port?

Base management can be handled with sand, lead, or even cat litter. Oh, you mean BASS management… No, plugging the port will not change the amount of power needed by the speaker. As jaxvon already pointed out, you will lose some output, causing you to potentially actually have to turn it UP slightly.

Plug a module into the OBD port, and you’re effectively patching into the vehicle’s engine control module, or ECM, which is the vehicle’s computer brain. The OBD port is a specialized connector with many individual pins and wires connected to that ECM.

What happens when you plug in a speaker port?

Running a full range means the speaker will still try its best to reproduce the frequencies sent to it until it naturally rolls off, which means it may try to reproduce frequencies it is not capable of reproducing. Plugging the port modifies the tuning of the cabinet, which in this case increases the roll off of the low end response of the driver.

What do you need to know about your implanted port?

They will also give you a wallet card with information about your implanted port. You should carry it with you at all times. Accessing your implanted port. When you need IV fluids or medication, your nurse will place a needle through the access point on your implanted port. This is called accessing your port (see Figure 4).