Menu

Navigation

What does blind spot Assist inoperative mean?

Posted on by Arif Clayton

What does blind spot Assist inoperative mean?

The most common problem is that the sensor can get damaged by water. If you are getting a blind spot inoperative on your dashboard every time it rains, remove the radar sensors on the rear bumper and ensure they are properly sealed. Water may be entering the radar sensors triggering the message on the dashboard.

How do I turn off Blind Spot Assist?

Select Settings on the home screen. Then select the Safety tab. Select Blind Spot Monitoring System. Choose between High, Low or Off to completely turn off the volume for alerts.

Why did my blind spot sensor stop working?

Side detection issue blind spot sensors stopped working. It… I backed into a gate with my 2015 Yukon XL Denali the rear sensor on the drivers side was knocked loose and is hanging by the wires.

What should I do if my Blind Spot Detection has failed?

Enter your zip code: Like indicated on other complaints for this vehicle, the Blind Spot Detection Module has failed (around 50-55K miles) and disabled the Blind Spot Detection System and the Park Sense Rear Park Assistance System which is a $2000+ repair.

Is there a problem with the side detection system?

After some research and follow up with my dealership, I have learned that the failure of the “side detection system” is widespread problem with GM vehicles. So much so that they have provided a bulletin extending warranty coverage on the chevy cruise, chevy impala, and GMC acadia with the same exact issue.

How does Mercedes Blind Spot Assist system work?

First, we need to understand how the system works. Radar sensors installed on the rear bumper are used to detect vehicles in the blind spot areas. The radar sensors are behind the bumper. They are not the same as the parking assist (ultrasonic) round sensor you see.

Side detection issue blind spot sensors stopped working. It… I backed into a gate with my 2015 Yukon XL Denali the rear sensor on the drivers side was knocked loose and is hanging by the wires.

What to do about blind spot detection system?

The dealer agreed to disconnect the system so the lights and tones do not stay on when driving. The dealer did not charge for the diagnostics time or for disconnecting of the system. I will probably not buy a Chrysler in the future, based on this and previous quality issues on our Dodge van.

After some research and follow up with my dealership, I have learned that the failure of the “side detection system” is widespread problem with GM vehicles. So much so that they have provided a bulletin extending warranty coverage on the chevy cruise, chevy impala, and GMC acadia with the same exact issue.

First, we need to understand how the system works. Radar sensors installed on the rear bumper are used to detect vehicles in the blind spot areas. The radar sensors are behind the bumper. They are not the same as the parking assist (ultrasonic) round sensor you see.

What does Blind Spot Assist inoperative mean?

Posted on by Arif Clayton

What does Blind Spot Assist inoperative mean?

The most common problem is that the sensor can get damaged by water. If you are getting a blind spot inoperative on your dashboard every time it rains, remove the radar sensors on the rear bumper and ensure they are properly sealed. Water may be entering the radar sensors triggering the message on the dashboard.

What causes Blind Spot Assist to be inoperative?

Another issue that makes the blind spot assist inoperative is the steering angle sensor which is mounted in the steering column. This sensor determines the position of the steering wheel. If it fails, the blind spot assist will not be able to get data and determine the position of the steering wheel.

What to do when Blind Spot Assist stops working?

If you are getting a blind spot inoperative on your dashboard every time it rains, remove the radar sensors on the rear bumper and ensure they are properly sealed. Water may be entering the radar sensors triggering the message on the dashboard. In some cases when the blind spot assist stops working the wiper blades may stop functioning as well.

Where does blind spot detection inoperative in Mercedes?

I am from Calgary area in Canada, where temperatures have dropped to around -20 degrees Celsius. Add to this a very dirty car with much slush freezing on the sides of car during the evening. Could this be a sensor block thing?

What happens when the blind spot sensor fails?

When the blind spot radar sensors in the rear bumper fail, the turn signals may also stop working. If you are getting a blind spot inoperative on your dashboard every time it rains, remove the radar sensors on the rear bumper and ensure they are properly sealed.

Another issue that makes the blind spot assist inoperative is the steering angle sensor which is mounted in the steering column. This sensor determines the position of the steering wheel. If it fails, the blind spot assist will not be able to get data and determine the position of the steering wheel.

If you are getting a blind spot inoperative on your dashboard every time it rains, remove the radar sensors on the rear bumper and ensure they are properly sealed. Water may be entering the radar sensors triggering the message on the dashboard. In some cases when the blind spot assist stops working the wiper blades may stop functioning as well.

When the blind spot radar sensors in the rear bumper fail, the turn signals may also stop working. If you are getting a blind spot inoperative on your dashboard every time it rains, remove the radar sensors on the rear bumper and ensure they are properly sealed.

When did Blind Spot Assist start in Mercedes Benz?

This feature has been optional in many Mercedes-Benz models since early 2010. In this guide, we are going to take a look at some of the common problems with Mercedes blind spot assist and why you may get a warning message such as “Blind Spot Assist Inoperative” or “Blind Spot Assist Currently Unavailable.