What is a air blend door actuator?

What is a air blend door actuator?

An air blend door actuator is a small electric motor that houses in a plastic construction. The settings work for different aspects such as temperature, floor, mid vent, defrost, and fresh air. This way, a passenger can control the temperature of the air and in which direction they want the flow of this air.

Why does air come out of the dash vents?

If system (fan switch) is off and I just have it on vent, the outside air mostly blows at your feet. Sometimes it will come out of the dash vents. If the a/c button is pressed in but fan selector is off the amber a/c light will be on sometimes or just flicker.

Where are the vents on a car located?

Step 1 – Most air control vents are equipped with a flow control door that is located at the vent outlet. This door is controlled by a thumb wheel that when activated will open and close the vent air flow door. Work the thumb wheel from one side to the other while checking the airflow.

Where does the air come from in a GMC Sierra?

This 2005 GMC Sierra came in with the complaint that the air will only flow from the defroster vents, regardless of where it is commanded to. This Sierra has auto a/c controls and no floor mounted center console.

Why are the vents on my GMC Sierra stuck?

The most common symptom of course is lack of control over the vent output position and normally it will be stuck in the defroster only position. If it is not currently stuck in the defroster position but you are changing the actuator anyways. make sure that you set the vent position to defrost before starting this procedure. You will see why later.

If system (fan switch) is off and I just have it on vent, the outside air mostly blows at your feet. Sometimes it will come out of the dash vents. If the a/c button is pressed in but fan selector is off the amber a/c light will be on sometimes or just flicker.

Step 1 – Most air control vents are equipped with a flow control door that is located at the vent outlet. This door is controlled by a thumb wheel that when activated will open and close the vent air flow door. Work the thumb wheel from one side to the other while checking the airflow.

Why does my car have no air in the vents?

Step 3 – A fan blower motor is controlled by either a switch in the passenger compartment or by a computer. If this fan motor is starting to fail it will cause the fan motor to run at a lower speed resulting in low air flow. To test this condition an amp meter is needed, connect the meter lead to the power wire of the fan motor.

Why is my defrost vent not working on my truck?

Also, there is no light coming on when the AC button and/or the recirculating buttons are pushed. All fuses look good. When the AC button is pushed, it doesn’t appear to engage the compressor. What could be happening? Can’t drive around without defrost. Too dangerous. Thanks!