When I turn on my car AC nothing happens?
Turn the car’s fan motor on high and press the button to turn on the AC. If it does not turn on, it is an indication that either the switch itself is malfunctioning or the AC circuit is not getting power. Step 2: Verify that air is blowing. Verify if you are able to feel air blowing through the vents.
Is there a fuse for the air conditioner?
The fuse, particularly common in newer models, helps protect the electronic control. Check to ensure that the power supply to your unit is good, then unplug the air conditioner and remove the cabinet cover. The fuse will be located near the circuit board; check to see if it has blown, using a multi-meter if necessary.
Why is my air conditioner not working in my Toyota?
If you reach for the A/C in your Toyota car in the middle of summer and all you receive is a blast of hot air, your A/C system may be experiencing a number of issues. However, you can diagnose many problems on your own, such as insufficient pressure in the A/C system or a refrigerant leak.
How do you turn on the air conditioner in a Toyota?
Unplug the electrical connection, unscrew it and remove it. Pry off the trim panels surrounding the climate controls and radio to gain access to the control panel. Press the two fitting tabs in toward one another to release the heater control assembly. Start the vehicle and turn the A/C control up to the coldest setting.
How to troubleshoot the air conditioning in a Toyota Camry?
How to Troubleshoot the Air Conditioning in a Toyota Camry Start the engine and let it to run for a few minutes to allow the air to cool. Double check the controls to make sure the correct buttons are selected. This may seem simplistic, but human error could be to blame. Adjust the climate controls.
What should the pressure be on a Toyota air conditioner?
Attach the A/C pressure gauge test. Attach the blue-coded hose to the low-side port, and the red-coded hose to the high-side port. A normal reading is between 50 psi (pounds per square inch) and 80 psi.