Where does the third brake light go on a car?
The third brake light is normally centered and placed higher than the two typical brake lights below that flank the vehicle. Adding this third light captures the line of sight of the drivers following the car, as opposed to the use of just two lights, making the braking reaction faster.
Why are my brake lights not working properly?
Analog switches wear out over time, and they can get dirty, too, which interferes with their ability to make positive contact and transmit the right signal. Replacing the switch is not a big job, and it’s also straightforward for your mechanic to test brake light problems like this one.
Can a brake light switch be replaced at the same time?
Replacing the switch is not a big job, and it’s also straightforward for your mechanic to test brake light problems like this one. If all three brake lights are out at the same time, it’s unlikely that the trio of bulbs died simultaneously.
What to do if your brake light is out on one side?
These must normally be replaced as an assembly and are not serviceable. A brake light out on one side only is most often a bulb or socket problem. Try the emergency-flashers and if the lamp still does not light, bulbs or sockets are the very likely cause. Inspect the bulb filament and replace any found bad.
What to do when your third brake light is not working?
When the lower lights do not come on and only the third-brake light works, the brake-light switch may be ruled out. Again try the emergency-flashers to check for wiring, socket and lamp problems. If the flashers work, check for blown fuses as a few vehicles use separate circuits for the lower and third brake lights.
What causes brake lights to go out but lower lights work?
If the plunger of the switch does not contact the pedal, check for an adjustment. In rare instances, the brake booster may fail, and the pedal will not rise enough to contact the switch. Pull up on the brake pedal and if the lights go out, switch mis-alignment or pedal position error is the likely cause.
Is the parking brake warning light the same as the brake light?
The very first thing that you should check is to ensure that the parking brake is completely off. Depending on your car, the warning light for the brake system may be the same as the warning light for the parking brake.
Why does my brake light not flash when I Turn on the turn signal?
On this type system, the turn signals and brakes use the same circuit. When we use the turn signal switch, it cancels the brake light signal, on the side selected. If it did not, the lights would stay on and not flash. A bad turn-signal switch may interrupt the brake light circuit when it should not.