Where is the coolant temperature gauge?
The temperature gauge utilizes a sensor, located near or in the thermostat housing, to send an electrical signal through the vehicle’s internal computer corresponding to the specific coolant temperature, giving the gauge on your dashboard an accurate reading of the temperature.
How do I know if my coolant temp sensor is bad?
What Signs May Signal Your Coolant Temperature Sensor May Be Failing?
- Poor Fuel Economy.
- Irregular Temperature Readings.
- Black Smoke from Your Exhaust.
- Your Engine is Overheating.
- Your Check Engine Light is On.
How do you check coolant temp gauge?
How to Test a Temp Gauge
- Unplug the temperature gauge from the sending unit.
- Turn the ignition key to the “On” position.
- Ground the temperature gauge wire to the engine.
- Check the temperature gauge inside the car.
- Turn the ignition key to the “Off” position.
- Check the fuses inside the car.
When does the cooling fan come on on a Toyota?
The cooling fan is usually activated when the air is running at medium or high speed. The fan switch is bad – The fan switch comes on when the coolant is a set temperature. You can test the switch by disconnecting the wiring harness and using a jumper wire on the contacts.
Can a bad thermostat cause a Toyota to overheat?
The fan switch is bad – The fan switch comes on when the coolant is a set temperature. You can test the switch by disconnecting the wiring harness and using a jumper wire on the contacts. If the fan starts, the switch is bad and needs to be replaced. A symptom of a bad thermostat is an engine that overheats at highway speeds.
How can I tell if my Toyota radiator fan is bad?
The fan motor is bad – You may have a bad fan motor. You can test this when you are at home by finding the radiator fan switch and disconnecting the wiring harness. Use a jumper wire and insert it into the two contacts. If your fan does not come on, the motor is bad. Another way to check the fan is to turn on the air conditioning in the car.