How do you change the fuel pump on a GMC Sierra?
Engage the locking tab and replace the retaining ring by turning clockwise with the groove-joint pliers. Follow the directions in reverse order to reinstall the fuel lines and fuel tank. Replace the fuse, fuel and battery clamp and start the car to test the new fuel-pump module. Determine which fuel pump your GMC Sierra will need.
How to check fuel pump signal in gmflash?
1. CONNECT PIN1 (BLACK GROUND) TO PIN16 (PINK GROUND) 2. CONNECT PIN32 (RD/WH BATT + ) TO PIN47 (GY FUEL PUMP 12+) THIS WILL POWER THE PUMP TO RUN AND CHECK FOR A FAULTY FUEL PUMP. 3. NEXT, CHECK FOR FUEL PUMP SIGNAL AT THE FUEL SYSTEM CONTROL MODULE. 4. FIND THE DARK GREEN/WHITE WIRE IN PIN13.
What are the symptoms of a bad fuel pump?
Also, the symptoms are almost exactly the same as bad/clogged fuel filter. Here are the most common symptoms of a bad fuel pump in your GMC Sierra: One of the most common signs that a fuel pump is going bad is a whining sound. The whining sound can indicate that the fuel pump is going out before there are any performance based issues.
How do you replace a fuel pump in a car?
Pull the cylinder-shaped fuel pump off the assembly. Disconnect the electrical wire at the top of the pump. Replace with the new pump. The pump will clip into place. Screw the strainer into the bottom of the pump. The strainer will bolt into place. Connect the wiring harness to the top of the pump. Insert the fuel pump assembly into the fuel tank.
How to test the fuel pump on a Chevy Silverado?
All of the following fuel pressure test gauge kits will help test the fuel pump on your Chevrolet Silverado (Suburban, Tahoe) and GMC Sierra (Yukon, Yukon XL): As I mentioned at the beginning, testing the fuel pump simply involves connecting the fuel pressure test gauge to the fuel system.
Can a GMC Sierra run without a fuel pump?
Without gas your Sierra will not run at all. With that in mind, most of the symptoms of a bad fuel pump revolve around the vehicle stalling out or not running at all. In modern fuel injected vehicles, the fuel pump sits right in the fuel tank and “pushes” the gasoline to the fuel rail (s).
Also, the symptoms are almost exactly the same as bad/clogged fuel filter. Here are the most common symptoms of a bad fuel pump in your GMC Sierra: One of the most common signs that a fuel pump is going bad is a whining sound. The whining sound can indicate that the fuel pump is going out before there are any performance based issues.
What should the fuel pressure be on a Chevy Silverado?
If you want to save some bucks on this purchase take a look at my recommendations here: Where To Buy A Fuel Pressure Test Gauge. FUEL PRESSURE SPECIFICATION: The fuel pressure specification for the 1999-2006 4.8L, 5.3L, 6.0L Chevrolet Silverado (Suburban, Tahoe) and GMC Sierra (Yukon, Yukon XL) is 55 to 62 PSI. Flex fuel engines: 48-54 PSI.