How do you replace a high beam headlight?
Insert the new bulb back into the headlight assembly and rotate the base 1/4 turn clockwise to secure it. The passenger side high beam bulb can most easily be accessed by moving the coolant reservoir bottle out of the way. To do this, remove the single 10mm bolt that holds it in place on the side of the engine bay.
Do you need to replace both high and low beams?
Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.
How do you replace a low beam light bulb?
Insert the new H11 low beam bulb into the socket in the headlight assembly and rotate it 1/4 turn clockwise to secure it in place. Push the power connector on to the base of the new bulb until it clicks into place. Tug on the power connector to ensure that it is attached securely.
Where is the high beam headlight bulb located?
The High Beam headlight bulb is located at the inner corner of the headlight assembly closest to the center line of the vehicle. The OEM Sylvania 9005 high beam bulb has an all black plastic base. Turn the base of the high beam bulb 1/4 turn counter clockwise to unlock it and then pull it straight out of the headlight assembly.
Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.
What to do when your low beam headlight blows out?
You can often tell when a headlight blows out while you’re driving, but confirm which bulb has actually blown out by leaving your headlights on and getting out of the vehicle to check. Then get back in your vehicle and turn on your high beams. Some vehicles use a single bulb for both high and low beams while others do not.
What to do if you drop a low beam light bulb?
The oil on your hands can compromise the glass of the bulb, reducing its lifespan. Protect your bulb from this by wearing gloves or using a tissue any time you come into contact with the glass of the new low beam headlight bulb. Be careful not to drop the bulb as you remove it from the package.
What can cause a low beam headlight to be dim?
If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?