How do you reset the TPMS on a 2016 GMC Yukon?
Starting with the vehicle off, turn your key to the “On” position, but don’t start the vehicle. Find the TPMS reset button (check your manual if you need help), and hold it until the tire pressure light blinks three times. Then, start the car and wait 20 minutes for the tire pressure light to reset.
How does the TPMS work on a GMC Yukon?
When the TPMS detects a significantly under-inflated tire pressure, a “CHECK TIRE PRESSURE” message is displayed on the DIC and the low tire pressure indicator is displayed on the IPC. This DIC message will also set if a spare tire is in use.
When to retrain tire pressure sensor in GMC Yukon?
If warning indicators are still on after a completed relearn procedure, there is a problem in the TPMS. NOTE: When the wheels have been rotated, or a tire pressure sensor or RCDLR has been replaced, retrain the tire pressure sensor.
When to change placard pressure on GMC Yukon?
Use the VT56 or VT46 branded tools to change placard pressure for the GMC Yukon if upsizing tires/wheels, also when replacing with off-road tires or low-profile tires. VT56 placard value adjustment now available for March 2019 update!
Where is the tire pressure sensor on a GM car?
GM’s tire pressure monitor employs a sensor inside each tire’s valve stem. Reset each tire sensor light when you change tires or your tire pressure gets too low, causing the “TPMS” light to come on.
When to relearn TPMS in a GMC Yukon?
When a sensor is replaced in one or more tires, one or more wheels are replaced or tires are rotated in a GMC Yukon, a manual (stationary) or OBD TPMS relearn is recommended to transfer new and/or existing TPMS sensor IDs to the vehicle’s ECU. Type of TPMS system: Direct TPMS, sensors are installed in the wheel
Use the VT56 or VT46 branded tools to change placard pressure for the GMC Yukon if upsizing tires/wheels, also when replacing with off-road tires or low-profile tires. VT56 placard value adjustment now available for March 2019 update!
How often should you rotate the tires on a GMC Yukon?
It takes two minutes or less to perform an OBD relearn procedure on a GMC Yukon, and requires just one relearn procedure to memorize for various vehicle Makes. GMC recommends rotating tires every 7,500 miles (12 000 kilometers).
GM’s tire pressure monitor employs a sensor inside each tire’s valve stem. Reset each tire sensor light when you change tires or your tire pressure gets too low, causing the “TPMS” light to come on.