What does F4 mean on a washing machine?
The error codes F4, F21, and FP indicate an issue with the water drain. The drain hose or filter could be clogged. Make sure there is no kink or clog in the hose blocking the water.
How do I fix E4 on my washing machine?
When the washing machine shows error E4, the washing machine doesn’t get water or too little water to run the program. First, check whether the faucet is open properly. If it’s open, check the water supply. The inlet hose may be clogged or kinked.
What is 4E error in washing machine?
The 4E (4C) error indicates that the washing machine has detected that there is a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose.
What does F04 mean on a Hotpoint washing machine?
Blockage or pump issue
Hotpoint Washing Machine Error Codes
| Error Codes | Fault Type |
|---|---|
| F04 | Blockage or pump issue |
| F06 | Door lock problem |
| F07 | Circuit board and/or heating element fault |
| F08 | Heating element fault |
How do I fix E04 error on my washing machine?
The E04 error code appears at the end of the washing cycle, during the operation of the drain pump. It means that the device can’t remove all the foam from the drum. You can eliminate the e04 error code by cleaning the drain pump in the Bosch Nexxt 500 series washer.
What are washing machine error codes?
What does the error code means and how to fix it?
| New Code | Old Code | Cause |
|---|---|---|
| 1E | E7 | Water level sensor Issue |
| 3E 3E1 3E2 3E3 3E4 | EA EB | Motor defect |
| E4 | E1 | Water supply error. The appliance is not detecting that the unit is filling with water. |
| 4E1 4E2 | 4Ed | Water temperature issue |
How do I fix error code 4E?
The first step is to turn your Samsung washer off for a few minutes before turning it back on. Often the 4E error code will resolve itself by simply turning the power off and on, as this resets your washer.
How do I clear the error 4C on my Samsung washing machine?
If you have a top load washing machine that isn’t receiving enough water but is not showing a 4E or 4C error, you can add more water to it by using a different cycle. You can use the Deep wash or Deep fill cycles. Please contact Samsung Support to request service if the error still appears.
What does F04 error mean?
F04 – The pump is running when it shouldn’t be. Similar to the F1 error, moisture in your machine could have caused a short circuit in one of the control module connections, on this occasion the J5 module connector. Check the connector. Once again the module will need replacing if it has shorted.
What does fo4 mean on a dryer?
F4 error code normally means a pump-related problem.
How do I fix E04 error on my Bosch dishwasher?
What to do if the Bosch dishwasher shows the E04 error code on a display? This error indicates a water flow sensor failure….Try to reset the E04 code:
- disconnect the Bosch dishwasher from the mains;
- wait for 10-15 minutes;
- re-start the appliance.
What does E3 mean on washing machine?
The E3 error in Samsung washers means a drum overflow with water. The water level sensor sends a signal indicating that there is too much water in the drum. More precisely, there is more water than required for the selected program. Therefore, the washing machine stops washing.