Why does my 1990 Chevy Silverado not start?
My 90 would not start if the vacuum line to the MAP sensor was disconnected. The MAP is located behind the TBI. Be sure the vacuum hose is in good shape. Mine has to be replaced as the glue no longer worked and it leaked. If you have a vacuum pump, make sure the MAP can hold a vacuum or it needs to be replaced.
How to troubleshoot a no start GM 4.3L pick up?
Testing a Cranks but Does Not Start condition on your GM 4.3L, 5.0L, 5.7L pick up, van or SUV is not that hard to do, if you have a solid diagnostic strategy. In this article I’ll show you the basics of testing such a problem.
What kind of car is a 1990 Chevy Silverado?
OK, so I bought a 1990 Chevy Silverado with a 5.7L (350) TBI off Craigslist. I knew I’d have to do a lot to get it into shape, but now its kicking my behind.
My 90 would not start if the vacuum line to the MAP sensor was disconnected. The MAP is located behind the TBI. Be sure the vacuum hose is in good shape. Mine has to be replaced as the glue no longer worked and it leaked. If you have a vacuum pump, make sure the MAP can hold a vacuum or it needs to be replaced.
Why does my GM car say no start no crank?
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
What does it mean when your Honda Civic doesn’t start?
Does Not Crank Condition: Means that the engine is not cranking when you turn the key to crank the engine. In other words, the engine doesn’t turn over at all.
What to do if your Toyota won’t start?
Battery – If the connections on your battery become corroded, there is no longer a connection to the rest of the car. This can keep you from starting. Clean the posts and try to start the car. Additionally, the battery may be dead. Take a battery tester and test the cranking amps to see if they are weak.
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
Does Not Crank Condition: Means that the engine is not cranking when you turn the key to crank the engine. In other words, the engine doesn’t turn over at all.
What should I do if my engine won’t start?
You should see a bright spark jumping the gap in the spark tester. If you don’t see a spark, repeat the test. This time, adjust the spark tester to 30KV. If you still don’t see a spark, repeat the test and set the tester to 10KV. If this time you see a spark or no spark, you have a problem with the ignition system.
Why does my car not start when I push the start button?
False input or lack of input from sensors like the crankshaft position sensor (CKP) or camshaft position sensor (CPS) can prevent the engine from starting. Also, a bad throttle position sensor (TPS) may cut off the spark to the cylinders.