Why is my right side brake light not working?

Why is my right side brake light not working?

My trailers running lights, side markers, turn signals, 4-way hazard lights are all work fine including left side brake light. The problem is that the right side brake light stopped working with head lights on or off. I initially thought that the LED tail light unit went bad so I replaced it with a new one but with the same result.

Why are the brake lights not working but the tail lights are?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

How can you tell if your brake light bulb is bad?

Once the socket has been removed it will expose the bulb which may have a burned mark or be light blue in color which indicates a leak in the glass. In either case the bulb is no good. Grasp the bad bulb and pull it from the light socket. Some bulbs you will need to push down and twist counterclockwise.

Why is the right brake light on my Savana not working?

I recommend starting off by checking both the connector on your 1998 GMC Savana and the connector on your trailer. Check to make sure that they are clean and free of debris. Any white or green residue could mean that there is corrosion which would cause this issue as well.

Why is the right side brake light not working?

The right side light does not work – no brake light or turn signal. We have changed the bulb but still nothing. Any suggestions? Sounds like you are not getting any voltage to the right side.

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

Why are my stop lights not working in my truck?

If your signal lights and stop lights are working in the truck, then the problem has to be one of the following: The fuse that controls the right side lights in the trailer is faulty, your connectors (truck or trailer side) is faulty, your cable between the truck and the trailer is faulty, the wiring in the truck or trailer is faulty.

Where are the brake lights on my car?

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.