How do you align a Chevelle hood?
Just tighten the front bolts snug, and adjust the hood back or forward, with the rear bolt loosened, then tighten the rear bolts and see where you are at. Also make sure you oil all 14 rivets in the hinge set, dry hinges could make the hood stay up in the back.
Can you adjust Hood height?
Open the hood and find the hard rubber stoppers on either side, just near the edge of the where the hood sits when closed. Use your hand to loosen or tighten these until the gap along the front of the hood is even. These stoppers raise and lower the height of the hood when it is closed.
How do you open the hood on a c1500 suburban?
Popping the hood on your C1500 Suburban is a two step process, you need to release the hood latch inside your C1500 Suburban and then you need to release the safety latch under your hood in the front of your C1500 Suburban. The video above shows you the location of both hood latches.
How do you align headlights on a suburban?
Locate the center of your Suburban’s hood and transfer that location to your flat surface by making a vertical mark with the masking tape. Measure the distance from the center of the grill to the middle of each headlight and transfer those measurements to your flat surface by marking vertical lines with masking tape. Turn your headlights on.
Where are the adjustment screws on a suburban?
Locate the adjustment screws on the headlights of the Suburban. They should be on the outside edge and top of your headlights. Using a screwdriver, turn the outside adjustment screw so that the beams fall in the center of your cross marks on the flat surface.
What’s the best way to Park a suburban?
Park your Suburban approximately 25 feet from a flat surface like a garage door or building wall. Park on flat, level ground and make sure all tires are inflated evenly. Measure the distance from the ground to the center of your headlights. On the flat surface, use masking tape to make a horizontal line the exact height you just measured.
Popping the hood on your C1500 Suburban is a two step process, you need to release the hood latch inside your C1500 Suburban and then you need to release the safety latch under your hood in the front of your C1500 Suburban. The video above shows you the location of both hood latches.
How do you adjust headlights on a suburban?
Measure the distance from the center of the grill to the middle of each headlight and transfer those measurements to your flat surface by marking vertical lines with masking tape. Turn your headlights on. Make sure they are set on low beams. Locate the adjustment screws on the headlights of the Suburban.
Locate the adjustment screws on the headlights of the Suburban. They should be on the outside edge and top of your headlights. Using a screwdriver, turn the outside adjustment screw so that the beams fall in the center of your cross marks on the flat surface.
Where are the cross marks on a Chevy Suburban?
Turn your headlights on. Make sure they are set on low beams. Locate the adjustment screws on the headlights of the Suburban. They should be on the outside edge and top of your headlights. Using a screwdriver, turn the outside adjustment screw so that the beams fall in the center of your cross marks on the flat surface.