How do you get a timing cover off?
Remove the timing cover holding bolts in a counterclockwise direction with an adjustable wrench. Pry the timing cover off with a flat-blade screwdriver if necessary. Scrape the seal or gasket residue from the cover mating surface on the engine block and from the timing cover with a gasket scraper.
How do you loosen a timing belt?
Here’s how to remove the timing belt:
- Loosen the middle tensioner cog in the middle of the timing configuration; it’s smaller than the two cams and will have a bolt on it.
- As you’re loosening the bolt, push down on the spring and move it downwards.
- The belt should now have lost its tension and be easy to remove.
How do you remove a timing belt cover?
On most timing chain cars and many timing belt cars, the water pump has to come off to get access to all of the bolts or to get enough clearance to get the cover off. Remove the bolts holding it down and gently pry it off. Step 6: Remove the drive pulley.
Can you remove the tensioner on a timing belt?
Keep testing yourself! Loosen the mounting bolt (s) holding the belt tensioner using any special cam holding tools, while following the service manual. Do not remove the tensioner completely unless replacing it.
Can a harmonic balancer be removed from a timing belt?
Determine if the harmonic balancer pulley needs to be removed to remove the timing belt cover. Often, the cover saddles over the end of the crankshaft, and this pulley will not allow you to remove the cover without first removing it.
Can a broken timing belt be removed on an interference engine?
Don’t do this on interference engines unless you’re sure the belt is still intact. If you have not already bent your valves with a broken timing belt, you will likely do so if you spin the crankshaft without the camshaft spinning. Determine if the harmonic balancer pulley needs to be removed to remove the timing belt cover.