What does the wrench light mean on a Honda?
Maintenance Minder™ Indicator Light: A yellow wrench on your dashboard means your Honda Accord is due for routine maintenance. It means ECON mode has been activated and is helping your Accord deliver an efficient performance.
When to reset the maintenance required light on a Honda Accord?
It is set to trip at certain mileage intervals as long as it’s reset when the service is performed. The Accord has been around since 1976, and depending on its year, different procedures are required to reset the light. From the late 1990s until now, the procedure remains the same. Locate the key slot to the left of the maintenance required light.
How do I Reset my maintenance required light?
Press and hold the reset button until you see the oil life indicator (this says “oil life” and has a percentage). Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds. The oil life indicator and maintenance requirement light blinks. Let go of the button one more time and hold for five seconds.
How do you reset the maintenance required light on a Prius?
2015-2020 Prius (OIL RESET) Maintenance Required Indicator Reset STEP 1. Push the START BUTTON, don’t start the ENGINE (Accessory Mode Only) STEP 2. First Clear the System message by pressing the BACK Button on Driver Info Button.
How to reset the maintenance required light on a Lexus?
Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.
How do I reset the required maintance light?
- Turn ignition switch to the ON position
- Trip Display to TRIP A mode
- Turn the ignition switch to the OFF position
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
How do I Turn Off the maintenance required light on my Honda?
How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.
How do I reset maintenance light?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.