What is the tire pressure for a 2010 Toyota Prius?
Recommended tire pressure for 2010 Toyota Prius is 35 psi for front tires and 33 psi for rear tires.
How do you reset the tire pressure light on a 2011 Toyota Prius?
To reset the system, first make sure the tire pressures are correct. Turn the engine on, then press and hold the reset button. You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times.
What is the correct tire pressure for a Toyota Prius?
Toyota tyre pressure and size guide
| MODEL | TYRE SIZE | PRESSURE FRONT |
|---|---|---|
| Prius | 195/65 R15 | 2.5 bar or 36 psi |
| Prius | 215/45 R17 | 2.2 bar or 32 psi |
| Prius Plug-in | 195/65 R15 | 2.5 bar or 36 psi |
| Land Cruiser | 245/70 R17 | 2.2 bar or 32 psi |
What PSI should my Prius tires be?
32 psi
This tyre placard recommends a minimum tyre pressure of 32 psi for the 2019 Toyota Prius i-Tech. This is equal to 220kPa and 2.2 bar. Note: This advice is only to be used as a guide.
What is the tire pressure for a Toyota Prius?
How to reset low tire pressure warning on Toyota Prius?
Make sure all tire pressures are correct according to the owner’s manual. Put your foot on the brake and press the power button to turn the system on. Press and hold the TPMS reset button located below the steering wheel until the TPMS indicator light flashes slowly three times.
How to reset tire pressure sensor TPMS light?
How To Reset Tire Pressure Sensor TPMS Light on Toyota Prius (2006-2021) – Toyota Prius is a hybrid car with both a combustion engine and an electric motor. A petrol engine is economical at a continuous speed and consumes more fuel at a varying pace.
Where is the reset button on a Toyota Prius?
Press and hold the TPMS reset button located below the steering wheel until the TPMS indicator light flashes slowly three times. Wait for a few minutes and then turn the vehicle off.