What kind of water pump does an Oldsmobile Bravada have?
The Oldsmobile Bravada’s water pump is designed to function for many thousands of miles, but replacing one is a straightforward endeavor. All models of the Bravada series were manufactured with the 4.3 liter V-6 engine, which had a front-mounted, belt driven water pump.
When to replace a water pump in a car?
You can replace a damaged water pump in this engine if the vehicle begins displaying signs of water pump failure. Common water pump failure signs include leaking coolant, engine rattling (from the water pump) and loss of the serpentine drive belt while driving.
How do you remove a water pump from an engine?
Remove the water pump pulley bolts, and pull the water pump pulley directly off the unit. Remove the water pump mounting bolts around the unit using a ratchet. Remove the water pump itself from the engine. Some coolant might drain out when you remove the unit; this is normal. Clean the water pump mounting surface with a rag.
How do you install a new water pump?
Install the new water pump. The replacement pump will include a new gasket, for its outer edge. The old gasket cannot be reused. Bolt it in with the four main bolts, Reconnect the hoses, then replace the pump pulley with the three smaller screws. Install the fan belt around the pulley. Refill the system with coolant.
The Oldsmobile Bravada’s water pump is designed to function for many thousands of miles, but replacing one is a straightforward endeavor. All models of the Bravada series were manufactured with the 4.3 liter V-6 engine, which had a front-mounted, belt driven water pump.
Install the new water pump. The replacement pump will include a new gasket, for its outer edge. The old gasket cannot be reused. Bolt it in with the four main bolts, Reconnect the hoses, then replace the pump pulley with the three smaller screws. Install the fan belt around the pulley. Refill the system with coolant.
How do you replace a water pump pulley?
Bolt it in with the four main bolts, Reconnect the hoses, then replace the pump pulley with the three smaller screws. Install the fan belt around the pulley. Refill the system with coolant. It is recommended that the same style and color of coolant be used.
Where is the water pump on a Honda Accord?
Open the metal cap on the radiator, then unscrew the drain plug on the bottom, passenger side of the radiator housing. The coolant will take about ten minutes to drain completely. Remove the old water pump. It is located on the very front of the engine, on the top of the fan shaft.