Why are my brake pads worn out on my GMC Sierra?
Pressurized brake fluid from the brake master cylinder causes the pistons in the brake calipers to expand and clamp the brake pads onto the rotor. Brake pads, made from a composite friction material that wears with use, are considered a normal wear point and require periodic maintenance.
How often should you replace brake pads on a 2002 Chevy?
General Motors recommends that you replace the brake pads on the 2002 Chevy pickups every 50,000 miles. Of course, that is merely a guideline, as the bake pads may wear more quickly based on the driving habits of the owner.
How do you replace brake pads on a Chevy truck?
Use the replacement of the brake pads as an opportunity to service the entire braking system. Park the Chevy truck on a flat surface. Engage the parking brake and pull the hood release lever under the dashboard on the driver’s side of the truck. Lift the hood and remove the cap from the master cylinder.
Where does the wear indicator go on the front brake pads?
The wear indicator normally and on your vehicle goes on at the inner position on the front brakes. And also you are correct on the rear pads, the wear indicator goes on the outer pad.
Pressurized brake fluid from the brake master cylinder causes the pistons in the brake calipers to expand and clamp the brake pads onto the rotor. Brake pads, made from a composite friction material that wears with use, are considered a normal wear point and require periodic maintenance.
What does it mean when your brake pads wear down?
Conveniently, most brake pads have a wear indicator, which warns you when the pads have worn down. The wear indicator is a small piece of metal embedded in the brake pad that makes contact with the rotor when the pad wears down, resulting in a squealing noise as you apply the brakes. If you hear this sound, it’s time to change your brake pads.
What’s the difference between front and rear brake pads?
Front and rear brake pads may appear similar, but they are very different. On most vehicles, the front brakes apply the most pressure during braking. This requires the front pads to be larger than the rear pads, but even with their larger size, the front pads normally wear out quicker than the rear.
Do you have to retract the caliper before replacing the brake pads?
It is now time to lower the caliper back into position, but before you can do so, you will have to retract the caliper pistons so they will fit over the thicker, new brake pads. First, remove the brake fluid reservoir cap, to lessen the pressure of the brake fluid.