Why does my Toyota Tacoma have a vibration in the seat?

Why does my Toyota Tacoma have a vibration in the seat?

Officially, Toyota says: “Some 2005 – 2014 model year Tacoma vehicles equipped with automatic transmission may exhibit a vibration felt in the seat, floorboard, and steering wheel between 15 – 25 mph caused by a second order drivetrain vibration under acceleration.”

Is there a fix for the Tacoma driveline vibration?

Toyota has issued yet another Technical Service Bulletin related to the driveline vibration associated with some Tacoma pickups. This is the most extensive TSB we have seen in a while and hopefully this is the real fix. Toyota has issued another TSB for the driveline vibration issue.

Is there a TSB for Toyota Tacoma driveline?

Toyota has issued another TSB for the driveline vibration issue. This perplexing problem affects an inconsistent amount of trucks. We have heard trucks on the same lot can have varying severity of vibration.

Is there steering wheel damper on Toyota Tacoma?

Install the Steering Wheel Damper. If all else fails, Toyota recommends putting a steering wheel damper on the truck. Here is a picture of the 2012-2014 Steering Wheel after you have removed the cover. First, we have been told by several sources that the steering wheel damper is really a last chance effort to fix the issue.

https://www.youtube.com/watch?v=5lIOZY9Y508

Why does my Toyota Tacoma shudder when driving?

In order to understand this issue, we went to a local Toyota dealer and took a Tacoma out for a few hours. We drove highways and streets, up hill and down. The truck performed admirably except when driving 15-25 mph through different school zones or up hill. The fact is that it shuddered through the seat and a little on the steering wheel.

What’s the problem with my Toyota Tacoma drive shaft?

Owners like those on Toyota Tacoma forums like Tacomaworld.com say the issue is about angles and the two-piece drive shaft. There are many owners who have decided to address the issue on their own and work out their own fixes. One of the common fixes deals with inserting shims to change this angle.

Posted In Q&A