Can I fix my CV axle?
While one can repack, reboot and rebuild CV axles, it makes more sense for the average do-it-yourselfer to procure replacement units and swap out the old axles. If a boot is torn or missing, it is possible to save the joint if caught early enough, but usually the damage has already been done.
What is the purpose of a CV axle?
Constant velocity (CV) axles are a drivetrain component commonly found on many modern road-going vehicles. They serve the purpose of transferring power from the vehicle’s transmission and differential to the wheels to drive the vehicle forward.
What to do when you remove axle from CV joint?
It’s normal for some transmission fluid to leak out as you remove the axle from the cv joint. You should put down a catch pan. On your vehicle, the axle may have to pass through an enclose piece called a wishbone before it’s completely free. You can remove the band from the inner boot to help the old axle pass through.
How long does it take to change a CV axle?
If you don’t run into problems like a seized axle or joint, it should be done in an hour or less. If you have an issue, like a part that’s rusted and fused to the hub (like I recently had)]
What to do if your CV axle nut is stuck?
You will need to use pliers to straighten the two bent ends of the cotter pin before you can remove it. If the pin is stuck, try spraying it the a penetrating lubricant from a hardware or automotive store. The lubricant should actually help with the axle nut as well. Remove the axle nut. Once the cotter pin is out, you can remove the axle nut.
Constant velocity (CV) axles are a drivetrain component commonly found on many modern road-going vehicles. They serve the purpose of transferring power from the vehicle’s transmission and differential to the wheels to drive the vehicle forward.
What causes a CV axle to go bad?
CV axles have inner and outer joints with a “boot” on each end. CV axle failures are usually caused by a broken or leaking boot, which is often followed by failing bearings in a joint. When joints wear out, the symptoms will be obvious.
When is the best time to get a CV axle replaced?
Most people will take their cars into the shop when it’s time for a new CV axle, but it’s a job that you can absolutely do yourself with some time, patience, and plenty of elbow grease. Don’t be intimidated, but do spend the time to research your own vehicle to make sure you’re comfortable with the work.
It’s normal for some transmission fluid to leak out as you remove the axle from the cv joint. You should put down a catch pan. On your vehicle, the axle may have to pass through an enclose piece called a wishbone before it’s completely free. You can remove the band from the inner boot to help the old axle pass through.