How do I put my mini Jambox in pairing mode?
To place the speaker in pairing mode, you hold the button with two arrows down until you hear “Mini Jambox is in pairing mode.” The power light will also flash red. Find the “MINIJAMBOX” under available devices in your Bluetooth setup menu, and you’ll hear a chirp when the pairing is complete.
How do I pair my Jambox speaker?
To pair, go to Bluetooth® settings on your smartphone, tablet, computer or device and connect to “BIG JAMBOX by Jawbone”. Enter “0000” if asked for a passcode. To enter pairing mode thereafter, hold the pairing button until the LED flashes red & white.
How do I pair Jawbone to iPhone?
Pair the Jawbone with the iPhone. Tap “Jawbone” in the list of Devices in the Bluetooth menu on the iPhone. Enter the pin number “0000” when prompted by the iPhone and tap “Connect.” The two devices should now be paired. Test the connection by placing a call from the iPhone while wearing the Jawbone.
How do I connect my Jawbone to my iPhone 10?
put your jawbone in discovery mode an then pair it with your iphone… Hold the power button and the Jawbone button on your jawbone at the same time. The lights will toggle between red & white. This means it in discovery mode. From there open your iphone and turn on Blue Tooth.
How do I reset my Mini Jambox?
Resetting the Jambox
- Make sure your Jambox is off (like in the picture above)
- Make sure your Jambox is NOT plugged in.
- Press and hold the big round button on the top of the speaker.
- While you’re still holding, plug the Jambox into a power source.
- It should light up immediately.
How to upgrade the jawbone mini jam box?
Here’s how to do it: 1 Unplug the Mini Jambox. 2 Power down the Mini Jambox. 3 Press and hold the Play/Pause button (circular button on top). 4 While still holding the button, plug the Mini Jambox to a power source. 5 Voilá, your Jambox should now be in recovery mode and you can flash it/upgrade it with a new language package.
What can I do about my Mini Jambox not working?
The most common solution for this problem is performing a Bluetooth Reset or a Software Update. This repair does not require you to dismantle your device. Even if nothing is plugged into the auxiliary port, your MINI JAMBOX may think it has an auxiliary cord plugged in.
Why are my jawbone Mini Jambox speakers blowing out?
Distorted sound, especially at high volumes, is indicative of a blown speaker. This can occur from overheating or overuse. If you are confident that the speakers are blown out, you may try to replace them. WARNING: replacing the speakers is a complex process and may result in further damage to the speaker.
Can you change the voice on a Jambox?
One of the “hey that’s cool” features of JamBox speakers used to be the ability to change the voice used by the controls (yes, the speaker talks to you to report battery status, pairing, etc.). Unfortunately, at least on the Mac, the updater software no longer works with the latest versions of MacOS. So no more installing “Rogue” or other voices.