How do you hook up an aftermarket car stereo?
Connect the aftermarket stereo. Now that the wiring harness adapter is plugged into the wiring harness and attached to the stereo plug, all you need to do is plug it into the back of your stereo. Now the wiring of your stereo is complete! Slide the new stereo into the dash.
What kind of adapter do I need for aftermarket radio?
The aftermarket wiring harness adapter is specifically designed to fit your vehicle’s wiring harness. This allows you to simply plug the new harness adapter into the factory radio harness and makes wiring your stereo fairly straightforward. Connect the new radio’s plug to the wiring harness adapter.
Can you add an aftermarket stereo to a Mercedes Sprinter?
It’s configurable and updatable using the Mercedes STAR computer system at dealerships. No aftermarket unit is going to offer those features, and in fact you need to wire in some additional equipment just to get an aftermarket stereo to respond to the steering wheel button controls for volume up/down and telephone on/off hook.
Do you need dash kit to install aftermarket stereo?
Some vehicles require a dash kit to allow the aftermarket stereo to fit in the car. Follow the instructions in the dash kit and the installation is easy. Most online dealers will offer these kits and a wiring harness free when you buy a stereo. Thanks!
Connect the aftermarket stereo. Now that the wiring harness adapter is plugged into the wiring harness and attached to the stereo plug, all you need to do is plug it into the back of your stereo. Now the wiring of your stereo is complete! Slide the new stereo into the dash.
The aftermarket wiring harness adapter is specifically designed to fit your vehicle’s wiring harness. This allows you to simply plug the new harness adapter into the factory radio harness and makes wiring your stereo fairly straightforward. Connect the new radio’s plug to the wiring harness adapter.
How do you connect an antenna to a stereo?
Use the diagrams to properly match each with its appropriate wire from the car. The antenna wire is much thicker with a metal head and can be connected separately before you install the stereo. These wires are usually short and won’t be reconnected until you are about to install the new stereo. Connect the output convertor if necessary.
Some vehicles require a dash kit to allow the aftermarket stereo to fit in the car. Follow the instructions in the dash kit and the installation is easy. Most online dealers will offer these kits and a wiring harness free when you buy a stereo. Thanks!
What kind of adapter do I need for aftermarket stereo?
The aftermarket wiring harness adapter is specifically designed to fit your vehicle’s wiring harness. This allows you to simply plug the new harness adapter into the factory radio harness and makes wiring your stereo fairly straightforward.
How to install a single Din car stereo?
How To Install a Car Stereo (Single & Double DIN) | Car Audio 101 1 Disconnect the Car Battery 2 Remove the Factory Car Stereo 3 Prepare the Car Stereo to be Installed 4 Run Additional Accessories (Bluetooth Mic, Satellite Radio, etc) 5 Install the Car Stereo
How does a radio hook up to a speaker?
The radio’s wiring harness delivers power to the radio and sends its output to the speakers. You’ll need to identify which wire goes to which speaker. Positive leads are usually solid-colored wires, while their accompanying negative leads tend to be the same color with a stripe of a second color.
The aftermarket wiring harness adapter is specifically designed to fit your vehicle’s wiring harness. This allows you to simply plug the new harness adapter into the factory radio harness and makes wiring your stereo fairly straightforward.
Where can I buy a car stereo for free?
Buy a car stereo from us, and you’ll save up to $50 on the installation gear package you need, depending on the car you drive and the stereo you buy – in many cases, you’ll get the package free. Installation gear available for most vehicles.