How do you reset the fuel filter on a 08 Duramax?

How do you reset the fuel filter on a 08 Duramax?

The way you reset the DIC Fuel Filter Life is to turn the key to the “Run” position, wait five seconds, compress both the fuel and brake pedals completely for ten seconds. The “Change Fuel Filter” words will disappear, if this happens, you know that you have reset the fuel filter life.

How to reset fuel filter life in GMC Duramax?

Without pressing the pedals, turn the ignition key to the on position without starting the engine. Wait five seconds. Completely press the brake and the accelerator pedals simultaneously and hold for ten seconds. The system is now reset. Turn the ignition key off. The next time the engine is started, the message will no longer be displayed.

What is the fuel filter for a Duramax 01-16?

The AFE 44-FF011 Pro-Guard D2 Fuel Filter for your 01-16 GM 6.6L Duramax delivers increased flow and efficiency that are demanded in a Diesel environment. High performance and high flow all in one quality engineered filter. This fuel filter meets or exceeds new GM specifications.

Why is my Duramax diesel engine not starting?

I have seen more leaks causing no starts, loss of prime and low fuel rail pressure codes from poor fitting aftermarket fuel filters use Delco only. Remember when dealing with power loss and fuel pressure issues the duramax has no in- tank or frame mount fuel pump pushing fuel to the engine.

When do you reset the fuel filter system?

Always reset the FUEL FILTER LIFE system after a fuel filter change. This message will appear on the DIC for ten seconds when a fuel filter change is required. See Fuel Filter Replacement on page 5-12 for more information. Diesel fuel is flammable. It could start a fire if something ignites it, and you could be burned.

Where is the fuel filter on a Duramax?

The Duramax fuel filter is located in the engine compartment, and it ensures that clean fuel is supplied to the fuel injection system. Open the hood and locate the fuel filter on the passenger’s side of the engine bay, near the firewall. Allow the engine to cool down, if it has been running.

Where is the water separator on a Duramax Turbo?

Depress the two release tabs on the wiring connector located on the water separator mounted on the bottom of the fuel filter. Pull the wire downward and out of the water separator.

When do I need to change my fuel filter?

This alert system will let you know when to change your engine oil, when you have water in your fuel, as well as letting you know that your fuel filter will need changed soon. However, the act of replacing the fuel filter will not erase the alert from the screen. This must be done manually from inside the cab of the truck.

When did the Duramax diesel engine come out?

The 6.6 liter Duramax diesel engine is manufactured by General Motors and has been used in the Chevrolet and GMC trucks since 2001.