How does an aftermarket car alarm work?

How does an aftermarket car alarm work?

An aftermarket alarm system simply connects to your dome light circuit and/or the little plunger/sensor that tells if your door is open. Thus if you do not use the fob to disarm it, it has no way to know whether the key was used to unlock the door or if it was broken into.

Why does my car alarm go off when I open the door?

Some vehicles do not integrate the key into the alarm system due to the design of the door. Some vehicles can be broken into using a “slim jim” tool that unlocks the door the same way a key does. So, if someone tries to break into your car using that tool, your alarm will still go off.

Can a car alarm be disarmed with a key?

You can arm and disarm the Alarm via the door lock with the key. The manufacturers do this in case you misplace your remote or the remote / fob batteries are dead. Most Aftermarket Car Alarms are NOT integrated with the drivers door lock.

Can a key fob disarm an alarm system?

The key fob, in addition to unlocking the door, electronically disarms the alarm. When you use a key to open the door on some systems, it will release the lock but the alarm system is still armed. When you open the door, it will trigger the alarm.

Why does my car door alarm keep going off?

Look at the switches on the cab where the door seals and see if any of the switched look damaged or at an angle. Most of the time the driver door switch fails for that door is used the most. Check each switch for power and see which door switch does not have power on the ground side when activating the switch. Replace the switch that does not work.

What should I do if my car alarm doesn’t work?

In any case, this does not mean your alarm isn’t armed when the doors don’t work, it just means the actuator malfunctioned and you just lock them manually. The fix is easy, too. The connecting tab can either be tightened or replaced as needed. Any alarm installer should usually have spare connecting tabs.

How does a car lock and alarm work?

The linkage is usually attached in parallel to the same pushrod that we push or pull on when we manually lock and unlock our doors by another small link (let’s call it a connecting tab) that comes with the alarm. The pushrod is what resides inside your door and is what connects the door lock lever/tab, to the lock/unlock mechanism.

Can a key fob cause a car alarm to go off?

The key fob, also known as a car remote key, is a device which is used to lock/unlock your car doors and even start the engine with just a push of a button. Since the key fob also has controls linked with the car alarm system, a malfunctioning or faulty key fob can send an incorrect signal which may trigger the car’s alarm.