How does an EGR valve work on a diesel engine?

How does an EGR valve work on a diesel engine?

When you slowly and efficiently come to a stop, the valve also closes and stops the flow of exhaust gases. The process continues so long as the engine is operating. Once you shut off the engine, the valve also closes and stays in that position. Diesel and gasoline-powered engines can use an array of EGR valve configurations.

Why do I not feel pressure on my EGR valve?

You should feel vacuum or a slight pressure on your finger tip, depending on the particular system type. If you don’t feel a change in vacuum or pressure, likely the problem lies with the circuit that provides vacuum or pressure to the valve. Reconnect the vacuum hose to the valve.

What should resistance reading be for EGR valve?

For an electric EGR valve, you need to have a multimeter; this device will be used to do a resistance reading, referred to as an ‘ohms test.’ Once connected, you should see a reading of about 20 to 24 ohms. You can check the repair manual of your vehicle for this.

What causes an oil pressure gauge to be low?

Other causes of a high or low oil pressure gauge reading. Worn bearings sometimes cause the oil pressure to show a low reading. The mechanic will change the bearings if needed. A broken oil pump may cause a low oil pressure reading. In this instance, a mechanic will replace the oil pump.

Why is my oil pressure reading low on my GMC?

In this video we show common causes and solutions for GM vehicle experiencing low or no oil pressure reading on the instrument panel. This condition may also include a low oil pressure warning on the drivers information display and an illuminated check engine light and/or stored codes P0521 P0523 Watch this video for more information.

When to replace the EGR valve on a diesel engine?

The EGR valve on a diesel engine usually gets a lot more dirt in it, and it has to be replaced and cleaned more often. The carbon build up can also destroy the EGR valve and you have to replace it more often. A lot of people, reprogram the EGR valve to not function to reduce the amount of carbon build up in the engine.

What are the symptoms of a bad EGR valve?

When there is a problem with the EGR Valve, the check engine light or EPC(VW) light may occur on your dashboard. The two main issues EGR valves face are that, either the valve stays open or it shuts completely. Here are some common symptoms you will notice if you have a bad EGR valve.

What causes black smoke from the EGR valve?

2. Black Smoke from Exhaust. If the EGR valve stays open at all times and the exhaust fumes are being fed to the engine constantly, the engine gets deprived of oxygen. With too much fuel burning and less oxygen, a black smoke gets produced and escapes from the exhaust pipe especially when the car is idle.