How tall are 235 85R16 tires?

How tall are 235 85R16 tires?

Plus Sizes

235/85-16 245/75-16
Diameter inches (mm) 31.73 (805.9) 30.47 (773.9)
Width inches (mm) 9.25 (235) 9.65 (245)
Circum. inches (mm) 99.68 (2531.81) 95.72 (2431.28)
Sidewall Height inches (mm) 7.86 (199.75) 7.23 (183.75)

What is the height difference between 235 and 265 tires?

Plus Sizes

265/75-15 235/75-15
Width inches (mm) 10.43 (265) 9.25 (235)
Circum. inches (mm) 96.29 (2445.73) 90.72 (2304.36)
Sidewall Height inches (mm) 7.82 (198.75) 6.94 (176.25)
Revolutions per mile (km) 658.02 (408.88) 698.39 (433.96)

What size is 235 85R16 in inches?

P-Metric Tire Sizes – P-Metric to Inches Conversion Chart

Rim Size P-Metric Size Actual Tire Height
16 Inch 235/85R16 31.7 inches
245/75R16 30.5 inches
265/70R16 30.6 inches
265/75R16 31.6 inches

What is the difference between a 235 80r16 and a 235 85R16 tire?

The difference is overall diameter. The 235/80-16 is 30.9 inches in diameter. The 235/85-16 is 31.7 inches in diameter. A difference of 0.8 inches but only half of that, 0.4 inches, applies to above the tire.

Can I use 245 tires instead of 235?

Expert Reply: You might be able to replace a 235/65-17 with a 245/65-17 tire. The tires you have now, 235/65-17, are about 9.25 inches wide and 29 inches tall. On vehicles, especially newer vehicles, there is very little space to go to a larger tire without making other modifications.

How tall is a 235 85R17 tire?

235/85R17 tires have a diameter of 32.7″, a section width of 9.3″, and a wheel diameter of 17″. The circumference is 102.8″ and they have 617 revolutions per mile.

Are 265 75R15 the same as 31×10 5r15?

They’re virtually identical. I think the main reasoning behind the different size ratings is the 265 75R15 is usually more of a street oriented tire whereas the 31×10. 5″ has a more “truck” oriented tread.

How tall is a 235 70R15?

Radial T/A 235/70R15 Tire Specs

Size Diameter Rim Range
P235/70R15 102S SL RWL 400 A B 28″ 6-8″

How tall is a 235 75r15 tire?

15-inch Wheel Conversion Chart

Metric Standard
235/75/15 29.0″x 9.3″
245/75/15 29.5″x 9.6″
255/75/15 30.0″x 10.0″
265/75/15 30.6″x 10.4″

What is the difference between 235 and 245 tire size?

In selection width, there is a -10 or -4% difference between 245 mm old tire and 235 mm new tire. For the sidewall height, there is a -19 (10 %) difference from the old tire of 184mm and 165 mm new tire size.

What size is a 235 80 r16 tire?

30.8″
235/80R16 tires have a diameter of 30.8″, a section width of 9.3″, and a wheel diameter of 16″. The circumference is 96.7″ and they have 655 revolutions per mile.

What is the height of a 235 80 16 tire?

On your 235/80/16 it is 80% of the 235 mm in the side wall, or 188 mm tall. Your third is the rim size.

What is the difference between 235 / 80-16 and 235 / 85-16?

I have included a link to all of the 235/85-16 tires that we carry. The 235/85R16 tire is just about 1″ taller in diameter than your existing 235/80R16 tires, but only half of this difference will actually affect the trailer height (since the other half is above the axle).

What’s the difference between 235 and 85 trailer tires?

Because there isn’t a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in diameter. The 235/85-16 is 31.7 inches in diameter. A difference of 0.8 inches but only half of that, 0.4 inches, applies to above the tire.

How to tell the size of a Goodyear Tire?

Is the size of the wheel measured from one end to the other. It tells us the size of the wheel that the tire is intended to fit. A size P215/65 R15 tire is made for a wheel with a 15″ diameter. Indicates the maximum load that the tire can support when properly inflated.

How to calculate tire height for tire sizes?

Use our simple tire height calculator to calculate the tire height of metric tire sizes. Just input your metric measurement and click on “convert height” to view the tire height in inches. Then browse the suggested tire sizes that are close to the entered tire height.