How to replace AC compressor belt 01-06 GMC Sierra?
1A Auto shows you how to repair, install, fix, change or replace a broken, cracked snapped, or cut AC compressor belt on a 2002 GMC Sierra. This belt is correct for many GM vehicles but the application is the same for Chevrolet Silverado and GMC Sierra trucks, years 99, 00, 01, 02, 03, 04, 05, 06, and 07. Hey friends!
Why is my GMC Sierra air conditioner not working?
On a 03-07 Chevrolet/ GMC Truck with the Electronic Climate control, Removing and reinstalling the HVAC fuse, causing the electronic climate control to RESET seems to Remedy the condition in which no power is getting to the AC compressor clutch connector, thus causing the Air conditioner not to work. Will this last forever?
How much refrigerant is in a GMC pickup?
GMC Light Truck refrigerant and oil capacity charts Year Model Refrigerant Refrigerant Oil All Engines w/ Front AC Only R134a 29.00 7.50 1999-2001 All Engines R134a 31.00 8.50 1998 All Engines R134a 32.00 8.00 FULLSIZE PICKUP
Where to buy belt for GMC Sierra 1500?
Shop AutoZone for GMC Sierra 1500 Belt. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only
1A Auto shows you how to repair, install, fix, change or replace a broken, cracked snapped, or cut AC compressor belt on a 2002 GMC Sierra. This belt is correct for many GM vehicles but the application is the same for Chevrolet Silverado and GMC Sierra trucks, years 99, 00, 01, 02, 03, 04, 05, 06, and 07. Hey friends!
Why is my air conditioning not working on my GMC Sierra?
While there are a variety of reasons your GMC Sierra 1500 air conditioning won’t work, the most common 3 are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.
What kind of gas does a GMC Sierra 1500 use?
A version of the 5.3-liter V-8 can run on gasoline or E85, which is 85 percent ethanol and 15 percent gasoline. An aluminum variant of the 5.3-liter V-8 produces 310 hp. The Denali is fitted with a 345-hp, 6.0-liter V-8, while the 1500HD is powered by a 300-hp, 6.0-liter V-8.
What kind of engine does GMC Sierra Denali have?
Though its electrical motor does not actually propel the vehicle, GMC still classifies it as a hybrid. The Sierra Denali is a luxury pickup with a 345-horsepower, 6.0-liter V-8; permanent all-wheel drive; and a specially tuned suspension.
How do you replace the belt on a Vortec truck?
Picture and diagram of How to Replace Belt on 5.3L, 5.7L, 6.0L Vortec V8 in Trucks. This is the routing of the serpentine belt on the GM V8 Vortec engines in Chevrolet and GMC Trucks. Question: How do you route a 350 vortec belt?
Is the OEM GM belt the right length?
They are the right length. OEM GM belts will be made from quality materials that are going to last as long as the original belts. A GM belt is optimized to deliver the performance your parts need to keep them at peak performance.
Do you need a new GM Yukon XL belt?
Whether you drive a Yukon XL or a Custom Cruiser, your belts need to be checked for wear at regular intervals. When you need a new one, a genuine GM belt is the best choice. OEM GM belts are made to be exact fit replacement belts, so they never need to be modified in order to get them to fit.
Where is the tilt button on a GMC Yukon?
Manual Cushion Tilt (If Equipped) If your vehicle has this feature, you can raise or lower the front of the driver’s or passenger’s seat with this lever located at the inside edge of the seat. To raise or lower the front of the seat, move the lever up or down in a continuous motion until the cushion reaches the desired height.
Where is the power lumbar control on a GMC Yukon?
1-5 Power Lumbar Control (If Equipped) If your vehicle has this feature, the four-way control is located on the outboard side of the seat. To increase or decrease support, press and hold the front or rear of the control. Let go of the control when the lower seatback reaches the desired level of support.
Who is the owner of the GMC Yukon?
GENERAL MOTORS, GM, the GM Emblem, GMC, the GMC Truck Emblem and the name YUKON are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed.
Can you add refrigerant to a GMC Yukon?
Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a refrigerant. The A/C system in your Yukon consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling.
Why is my GMC Yukon air conditioner blowing hot air?
Video Description When the air conditioner in your 2004 GMC Yukon starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system.
Manual Cushion Tilt (If Equipped) If your vehicle has this feature, you can raise or lower the front of the driver’s or passenger’s seat with this lever located at the inside edge of the seat. To raise or lower the front of the seat, move the lever up or down in a continuous motion until the cushion reaches the desired height.
How do you replace a drive belt on a BMW?
To remove the rivets, you can use a small flathead screwdriver to pry them up, then using needle nose pliers, pull the rivet out. The expanding portion of the rivet will now come out with duct. Depending on model year, vehicle may have 3 or 4 expansion rivets.
How do you install an accessory drive belt?
To install accessory drive belt, begin by wrapping belt around crankshaft pulley, then over and around power steering pulley, around alternator, around coolant pump and around tensioner pulley. Avoid running belt under idler pulley for now.
What’s the best way to replace a serpentine belt?
Auto tensioners have either a hole that will fit a half inch drive ratchet, or a bolt you can use a socket to apply pressure to. Insert the wrench or place the socket over the bolt on the tensioner and twist it away from the belt to relieve the tension on it.
How long does it take to replace belt tensioner on Mercedes Benz W203?
Replacing the belt tensioner on your Mercedes-Benz W203 is a relatively easy job. You should be able to do it in an hour and is a great starter project if you are just beginning to DIY or “Do It Yourself” on your car. Let the car cool so you don’t have to work around a hot engine.
When to replace timing belt on Toyota Camrys?
All Camrys from 1990 to 2001 and V6s from 1990 to 2006 have belts that should be replaced every 60k miles. 4-cylinder Camrys built from 2002 on – and V6s from 1990 on – have chains.
When to replace timing belt on Toyota Venza?
All Venzas manufactured from 2009 to the present-day have a chain, so don’t stress about the belt. If you own a 2000 to 2004 V6 Tundra get ready for a replacement by 60k miles. For a 4.7 V8 engine made between 2000 and 2009, prepare to replace the belt when the mileage reaches 90k miles.
Auto tensioners have either a hole that will fit a half inch drive ratchet, or a bolt you can use a socket to apply pressure to. Insert the wrench or place the socket over the bolt on the tensioner and twist it away from the belt to relieve the tension on it.