What kind of coolant does a 1993 Honda Accord EX?
Prestone 50/50 Coolant/Antifreeze.
What type of antifreeze do I need for a Honda Accord?
Antifreeze/Coolant Prestone 1 Gallon Yellow 50/50 Coolant/Antifreeze.
How do you replace the radiator in a Honda Accord?
Here’s how to replace the radiator in the 1998 to 2002 model Honda Accord. Loosen the plug on the bottom of the radiator and drain the engine coolant into a resealable container. Remove the upper radiator hose and lower radiator hose.
Where is the coolant drain on a Honda Accord?
Place your coolant drain bucket underneath, and open the drain valve located on the bottom of the radiator. Figure 2. Find the drain plug and remove it. Work on your car while it is cold. Hot coolant can burn you, and many of the parts you will be accessing are right near the exhaust manifold.
Do you need to replace the reserve tank on a Honda Accord?
If your Accord is a six-cylinder model, remove the cruise control and ground control cables before pulling the reserve tank off the radiator. Replace the cables after dumping the coolant and replacing the tank. Tighten the radiator drain plug once all the coolant has drained out of the radiator.
What’s the best way to repair a leaking radiator?
Step 1: Locate the leak. Before you do anything else, make an attempt to locate the leak. There are many places coolant leaks from, so you want to make sure it is actually coming from the radiator. Step 2: Use a pressure tester. If you can’t easily spot the leak, you can use a pressure tester on the system.
How do you replace the radiator on a Honda Accord?
Keep your drain bucket under the lower radiator hose. Use hose clamps to pinch the transmission lines shut. This helps to reduce the amount of transmission fluid you will lose and also makes cleanup easier. Also, be sure the release the transmission cooler line retaining bracket from the radiator so that it doesn’t get hung up.
Place your coolant drain bucket underneath, and open the drain valve located on the bottom of the radiator. Figure 2. Find the drain plug and remove it. Work on your car while it is cold. Hot coolant can burn you, and many of the parts you will be accessing are right near the exhaust manifold.
When do you need to replace the radiator hose?
Radiator hoses will be inspected and should be replaced if old or leaking. Brittle or oil soaked hoses will fail after radiator replacement, necessitating additional repairs. If the engine has overheated the shop will inspect for signs of engine damage. Modern engines commonly have composite (plastic)…
Where is the drain valve on a radiator?
Remove the radiator cap, and set it to the side. Place your coolant drain bucket underneath, and open the drain valve located on the bottom of the radiator. Figure 2. Find the drain plug and remove it. Work on your car while it is cold. Hot coolant can burn you, and many of the parts you will be accessing are right near the exhaust manifold.